Dominik Brands

Dr.- Ing. Dominik Brands
Tel.: +49(0)201/183-2701 Fax: +49(0)201/183-2680 Raum: R12 S02 H17 dominik.brands@uni-due.de |
Universität Duisburg-Essen Fakultät für IngenieurwissenschaftenAbteilung Bauwissenschaften Institut für Mechanik Universitätsstraße 15 Raum R12 S02 H17 45141 Essen |
Forschung
Schwerpunkte
- Simulation von Arteriendeformationen
- High-Performance Computing
- Mehrskalige Modellierung von Eigenspannungen in Stählen
- Numerische Analyse des Ermüdungsverhalten von hochfesten Betonen
- Rekonstruktion patienten-spezifischer Arteriengeometrien
- Konstruktion von "Statistically Similar Representative Volume Elements (SSRVE)"
- Gekoppelte Mikro-Makro-FE-Formulierungen (FE²) für Mehrphasenstähle
aktuelle Projekte
- "Erfassung und Modellierung des Einflusses von Stahlfasern auf die Schädigungsentwicklung von Hochleistungsbetonen unter Ermüdungsbeanspruchung" (Projekt im Rahmen des DFG Schwerpunktprogramms 2020 "Zyklische Schädigungsprozesse in Hochleistungsbetonen im Experimental-Virtual-Lab") SPP2020
- "Experimentelle sowie numerische Modellierung und Analyse mikrostruktureller Eigenspannungen von warmmassivumgeformten Bauteilen mit gezielter Abkühlung" (Projekt im Rahmen des DFG Schwerpunktprogramms 2013 "Gezielte Nutzung umformtechnisch induzierter Eigenspannungen in metallischen Bauteilen") SPP2013
- "Design und Analyse funktioneller Komposit-Materialien mit verzerrungs-induzierter magneto-elektrischer Kopplung" (Projekt im Rahmen der DFG Forschergruppe 1509 “Ferroische Funktionsmaterialien - Mehrskalige Modellierung und experimentelle Charakterisierung”) FOR1509
ausgelaufende Projekte
- "Massiv parallele Simulation von Arterienwänden: Kontinuumsmechanische Modellbildung und numerische Lösung mittels FETI-Gebietszerlegungsverfahren", DFG-Projekt
- "Statistically similar representative microstructures in elasto-plasticity", Teilprojekt P8 im Rahmen der DFG-FG "Analysis and computation of microstructure in finite plasticity"
Lehre
Vorlesungen
- Berechnungsprogramme im Bauwesen,
- Bauinformatik 2 (ehem. Bauinformatik Teil 3 - Mechanik),
- Coupled Problems,
- Effective Properties of Micro- Hetergeneous Materials
- Technische Mechanik 3
- Höhere Mechanik
Übungen
- Introduction into nanomechanics and atomistic-based FEM
- Computational Inelasticity
Die Unterlagen zu den einzelnen Veranstaltungen werden über die Moodle-Plattform (http://moodle2.uni-due.de/) bereitgestellt. Weitere Informationen sind ebenfalls im LSF (https://campus.uni-duisburg-essen.de) zu finden.
Werdegang
1999 | Abitur am Theodor- Heuss- Gymnasium, Dinslaken |
1999 bis 2000 | Zivildienst |
2000 bis 2006 |
Studium Allgemeiner Maschinen- und Anlagenbau |
05/2006 bis 02/2013 |
Wissenschaftlicher Mitarbeiter am Institut für Mechanik, |
09/2012 |
Promotion zum Dr.-Ing. (Titel der Dissertation: "Geometrical Modeling and Numerical Simulation of Heterogeneous Materials"; Hauptreferent: Jörg Schröder, Korreferenten: Axel Klawonn, Wolfgang A. Wall |
02/2013 bis 11/2015 | Akademischer Rat am Institut für Mechanik, Fakultät für Ingenieurwissenschaften, Universität Duisburg-Essen |
seit 04/2013 | Mitglied im Vorstand des „Center for Computational Sciences and Simulation“ (CCSS) an der Universität Duisburg-Essen |
seit 01/2015 | Wiss. Mitarbeiter in der Stabstelle "Wissenschaftlichen Rechnens“ am Zentrum für Informations- und Mediendienste, Universität Duisburg-Essen |
seit 11/2015 |
Akademischer Oberrat am Institut für Mechanik, Fakultät |
Betreute Abschlussarbeiten
- Sarhil, M. (2018), Constitutive relations and homogenization assumptions in phase-field models with elasticity Martensite transformation as an example. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Uebing, S. (2018), Numerical simulation of metal heat treatment using fully coupled thermo-elasto-plasticity. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- von Hoegen, M. (2015), Investigation and comparison of differentapproaches for the incorporation of residual strains and stresses in patient-specific arterial wall simulation. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Ashutuosh, G. (2014), Thermo-elasto-plasticity – Continuum Mechanical Formulation and Finite Element Implementation. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Misera, M.A. (2014), A MATLAB-based FE-remeshing tool for transformation of P1-elements to Pn-elements. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Scheunemann, L. (2011), Construction of 3D Statistically Similar Representative Volume Elements for the Simulation of Dual-Phase Steels". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Scheunemann, L. (2010), Numerical Analysis of Random Two-Phase Composites under varying biaxial loading ratios". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
- Tielke, A.-K. (2009), Sensitivity Analysis of Plaque Components within Arterial Wall Simulations based on Patient Specific Data". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen und University of applied sciences, Fachhochschule Giessen Friedberg.
- Werner, D. (2008), FE-discretization and 2D Simulation of Arterial Walls - based on a Virtual Histology Database". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen, Report 45 (2008).
Publikationen
Hellebrand, S., Scheunemann, L., Brands, D. & Schröder, J. (2025), "Numerical investigation of microscopic residual stresses evoked by phase transformation in hot bulk forming parts", International Journal for Multiscale Computational Engineering. Vol. 23 |
BibTeX:
@article{HelSchBraSch:2025:nio, author = {S.~Hellebrand and L.~Scheunemann and D.~Brands and J.~Schröder}, title = {Numerical investigation of microscopic residual stresses evoked by phase transformation in hot bulk forming parts}, journal = {International Journal for Multiscale Computational Engineering}, year = {2025}, volume = {23} } |
Pise, M., Brands, D. & Schröder, J. (2024), "Development and calibration of a phenomenological materialmodel for steel fiber reinforced high performance concrete basedon unit cell calculations", Materials. Vol. 17(10), pp. 2247. |
BibTeX:
@article{PisBraSch:2024:dac, author = {Pise, M. and Brands, D. and Schröder, J.}, title = {Development and calibration of a phenomenological materialmodel for steel fiber reinforced high performance concrete basedon unit cell calculations}, journal = {Materials}, year = {2024}, volume = {17}, number = {10}, pages = {2247} } |
Gebuhr, G., Alvaro, M.A., Pise, M., Anders, S., Vicente, M., Brands, D. & Schröder, J. (2023), "Predictive power of crack opening rate for flexural fatigue life of steel fiber-reinforced high and ultra-high performance concrete", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12. |
BibTeX:
@conference{GebAlvPisAndVicBraSch:2023:ppo, author = {G.~Gebuhr and M.~A.~Alvaro and M.~Pise and S.~Anders and M.~Vicente and D.~Brands and J.~Schröder}, title = {Predictive power of crack opening rate for flexural fatigue life of steel fiber-reinforced high and ultra-high performance concrete}, booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures}, year = {2023}, pages = {1-12}, doi = {doi.org/10.21012/FC11.092370} } |
Gebuhr, G., Anders, S., Pise, M., Brands, D. & Schröder, J. (2023), "Approach for detection of fatigue phases using the example of high-performance concrete", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12. |
BibTeX:
@conference{GebAndPisBraSch:2023:afd, author = {G.~Gebuhr and S.~Anders and M.~Pise and D.~Brands and J.~Schröder}, title = {Approach for detection of fatigue phases using the example of high-performance concrete}, booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures}, year = {2023}, pages = {1-12}, doi = {doi.org/10.21012/FC11.092394} } |
Hellebrand, S., Brands, D. & Schröder, J. (2023), "Numerical Analysis on How Different Cooling Routes Effect Residual Stresses in Hot Bulk Forming Parts", International Journal of Plasticity, Damage and Fracture. Vol. 1 |
BibTeX:
@article{HelBraSch:2023:nao, author = {S.~Hellebrand and D.~Brands and J.~Schröder}, title = {Numerical Analysis on How Different Cooling Routes Effect Residual Stresses in Hot Bulk Forming Parts}, journal = {International Journal of Plasticity, Damage and Fracture}, year = {2023}, volume = {1} } |
Hellebrand, S., Brands, D., Scheunemann, L. & Schröder, J. (2023), "Numerical investigation of hot bulk forming processes with respect to the resulting residual stress distribution", Proceedings in Applied Mathematics and Mechanics. Vol. 22(1), pp. e202200155. |
BibTeX:
@article{HelBraSchSch:2023:nio, author = {S.~Hellebrand and D.~Brands and L.~Scheunemann and J.~Schröder}, title = {Numerical investigation of hot bulk forming processes with respect to the resulting residual stress distribution}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2023}, volume = {22}, number = {1}, pages = {e202200155} } |
Hellebrand, S., Brands, D. & Schröder, J. (2023), "On the three‐dimensional numerical analysis of residual stresses on two scales in hot bulk forming parts", Proceedings in Applied Mathematics and Mechanics. Vol. 23(3), pp. e202300087. |
BibTeX:
@article{HelBraSchSch:2023:ott, author = {S.~Hellebrand and D.~Brands and J.~Schröder}, title = {On the three‐dimensional numerical analysis of residual stresses on two scales in hot bulk forming parts}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2023}, volume = {23}, number = {3}, pages = {e202300087} } |
Pise, M., Brands, D., Schröder, J., Gebuhr, G. & Anders, S. (2023), "Virtual experiments for steel fiber-reinforced high performance concrete based on unit cell calculations", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12. |
BibTeX:
@conference{PisBraSchGebAnd:2023:ves, author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {Virtual experiments for steel fiber-reinforced high performance concrete based on unit cell calculations}, booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures}, year = {2023}, pages = {1-12}, doi = {doi.org/10.21012/FC11.092375} } |
Pise, M., Gebuhr, G., Brands, D., Schröder, J. & Anders, S. (2023), "Phase-field modeling for failure behavior of reinforced ultra-high performance concrete at low cycle fatigue", Proceedings in Applied Mathematics and Mechanics. Vol. 23(1), pp. e202300233 (8 pages). |
BibTeX:
@article{PisGebBraSchAnd:2023:pfmffb, author = {M.~Pise and G.~Gebuhr and D.~Brands and J.~Schröder and S.~Anders}, title = {Phase-field modeling for failure behavior of reinforced ultra-high performance concrete at low cycle fatigue}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2023}, volume = {23}, number = {1}, pages = {e202300233 (8 pages)}, doi = {DOI: 10.1002/pamm.202300233} } |
Pise, M., Schröder, J., Brands, D., Gebuhr, G. & Anders, S. (2023), "Phase-field modeling for fracture in steel fiber reinforced high performance concrete during low-cycle fatigue", International Journal of Plasticity, Damage and Fracture. Vol. 1(1), pp. 1-11. |
BibTeX:
@article{PisSchBraGebAnd:2023:pfm, author = {M.~Pise and J.~Schröder and D.~Brands and G.~Gebuhr and S.~Anders}, title = {Phase-field modeling for fracture in steel fiber reinforced high performance concrete during low-cycle fatigue}, journal = {International Journal of Plasticity, Damage and Fracture}, year = {2023}, volume = {1}, number = {1}, pages = {1-11} } |
Pise, M., Schröder, J., Brands, D., Gebuhr, G. & Anders, S. (2023), "Phase-field model for degradation of steel fiber reinforced ultra-high performance concrete during low-cycle fatigue", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12. |
BibTeX:
@conference{PisSchBraGebAnd:2023:pfmfd, author = {M.~Pise and J.~Schröder and D.~Brands and G.~Gebuhr and S.~Anders}, title = {Phase-field model for degradation of steel fiber reinforced ultra-high performance concrete during low-cycle fatigue}, booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures}, year = {2023}, pages = {1-12}, doi = {doi.org/10.21012/FC11.092383} } |
Schröder, J., Pise, M. & Brands, D. (2023), "Ein Phasenfeldmodell zur Berechnung der Ermüdung von faserverstärktem Hochleistungsbeton bei niedrigen Zyklen", In 27. Dresdner Baustatik Seminar - Realität - Modellierung - Tragwerksplanung. Union Druckerei Dresden GmbH. |
BibTeX:
@inproceedings{SchPisBra:2023:epz, author = {J.~Schröder and M.~Pise and D.~Brands}, title = {Ein Phasenfeldmodell zur Berechnung der Ermüdung von faserverstärktem Hochleistungsbeton bei niedrigen Zyklen}, booktitle = {27. Dresdner Baustatik Seminar - Realität - Modellierung - Tragwerksplanung}, publisher = {Union Druckerei Dresden GmbH}, year = {2023} } |
Xia, X., Niekamp, R., Brands, D. & Schröder, J. (2023), "A hybrid computational scheme on electromechanically coupled behaviors of aligned MWCNT/polymer nanocomposite sensors with strain-dependent tunneling effect", Archive of Applied Mechanics., Oct, 2023. Vol. 93(12), pp. 4305–4325. |
BibTeX:
@article{XiaNieBraSch:2023:ahc, author = {Xia, Xiaodong and Niekamp, Rainer and Brands, Dominik and Schröder, Jörg}, title = {A hybrid computational scheme on electromechanically coupled behaviors of aligned MWCNT/polymer nanocomposite sensors with strain-dependent tunneling effect}, journal = {Archive of Applied Mechanics}, year = {2023}, volume = {93}, number = {12}, pages = {4305–4325}, doi = {http://doi.org/10.1007/s00419-023-02493-2} } |
Gebuhr, G., Pise, M., Anders, S., Brands, D. & Schröder, J. (2022), "Damage development of steel fibre reinforced high performance concrete in high-cycle fatigue tests", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa. CRC Press, Oxon, United Kingdom. |
BibTeX:
@incollection{GebPisAndBraSch:2022:ddo, author = {G.~Gebuhr and M.~Pise and S.~Anders and D.~Brands and J.~Schröder}, title = {Damage development of steel fibre reinforced high performance concrete in high-cycle fatigue tests}, booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa}, publisher = {CRC Press, Oxon, United Kingdom}, year = {2022} } |
Gebuhr, G., Pise, M., Anders, S., Brands, D. & Schröder, J. (2022), "Damage evolution of steel fiber reinforced high performance concrete in low-cycle flexural fatigue: numerical modeling and experimental validation", Materials. Vol. 15(3), pp. 1179. |
BibTeX:
@article{GebPisAndBraSch:2022:deo, author = {Gebuhr, G. and Pise, M. and Anders, S. and Brands, D. and Schröder, J.}, title = {Damage evolution of steel fiber reinforced high performance concrete in low-cycle flexural fatigue: numerical modeling and experimental validation}, journal = {Materials}, year = {2022}, volume = {15}, number = {3}, pages = {1179}, note = {doi.org/10.3390/ma15031179} } |
Hellebrand, S., Brands, D., Scheunemann, L. & Schröder, J. (2022), "A multiscale approach to investigate residual stresses due to targeted cooling of hot bulk formed parts", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa. |
BibTeX:
@incollection{HelBraSchSch:2022:ama, author = {S.~Hellebrand and D.~Brands and L.~Scheunemann and J.~Schröder}, title = {A multiscale approach to investigate residual stresses due to targeted cooling of hot bulk formed parts}, booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa}, year = {2022} } |
Pise, M., Brands, D., Schröder, J., Gebuhr, G. & Anders, S. (2022), "Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa. CRC Press, Oxon, United Kingdom. |
BibTeX:
@incollection{PisBraSchGebAnd:2022:mmb, author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete}, booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa}, publisher = {CRC Press, Oxon, United Kingdom}, year = {2022} } |
Pise, M., Brands, D., Schröder, J., Gebuhr, G. & Anders, S. (2022), "Phenomenological material model for damage in steel-fiber reinforced high performance concrete during low cycle fatigue", Proceedings in Applied Mathematics and Mechanics. Vol. 22(1), pp. e202200236 (6 pages). |
BibTeX:
@article{PisBraSchGebAnd:2022:pmm, author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {Phenomenological material model for damage in steel-fiber reinforced high performance concrete during low cycle fatigue}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2022}, volume = {22}, number = {1}, pages = {e202200236 (6 pages)} } |
Schröder, J., Pise, M., Brands, D., Gebuhr, G. & Anders, S. (2022), "Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: numerical calibration and experimental validation", Computer methods in applied mechanics and engineering. |
BibTeX:
@article{SchPisBraGebAnd:2021:pfm, author = {Schröder, J. and Pise, M. and Brands, D. and Gebuhr, G. and Anders, S.}, title = {Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: numerical calibration and experimental validation}, journal = {Computer methods in applied mechanics and engineering}, year = {2022}, doi = {doi.org/10.3390/ma15031179} } |
Schröder, J., Pise, M., Brands, D., Gebuhr, G. & Anders, S. (2022), "Phase-field modeling for damage in high performance concrete at low cycle fatigue", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa. CRC Press, Oxon, United Kingdom. |
BibTeX:
@incollection{SchPisBraGebAnd:2022:pfm, author = {J.~Schröder and M.~Pise and D.~Brands and G.~Gebuhr and S.~Anders}, title = {Phase-field modeling for damage in high performance concrete at low cycle fatigue}, booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa}, publisher = {CRC Press, Oxon, United Kingdom}, year = {2022} } |
Behrens, B.-A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S. & Kock, C. (2021), "Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala", Forschung im Ingenieurwesen (Engineering Research). |
BibTeX:
@article{BehSchBraBruWesSchUebKoc:2021:npz, author = {Behrens, B.-A. and Schröder, J. and Brands, D. and Brunotte, K. and Wester, H. and Scheunemann, L. and Uebing, S. and Kock, C.}, title = {Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala}, journal = {Forschung im Ingenieurwesen (Engineering Research)}, year = {2021}, note = {10.1007/s10010-021-00482-x}, doi = {http://doi.org/10.1007/s10010-021-00482-x} } |
Maassen, S., Erdle, H., Pulvermacher, S., Brands, D., Böhlke, T., Gibmeier, J. & Schröder, J. (2021), "Numerical characterization of residual stresses in a four-point-bending experiment of textured duplex stainless steel", Archive of Applied Mechanics. |
BibTeX:
@article{MasErdPulBraBoeGibSch:2021:nco, author = {Maassen, S.F. and Erdle, H. and Pulvermacher, S. and Brands, D. and Böhlke, T. and Gibmeier, J. and Schröder, J.}, title = {Numerical characterization of residual stresses in a four-point-bending experiment of textured duplex stainless steel}, journal = {Archive of Applied Mechanics}, year = {2021}, note = {10.1007/s00419-021-01931-3}, doi = {http://doi.org/10.1007/s00419-021-01931-3} } |
Pise, M., Brands, D., Schröder, J., Gebuhr, G. & Anders, S. (2021), "Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations", Proceedings in Applied Mathematics and Mechanics. Vol. 21(1), pp. e202100180 (4 pages). |
BibTeX:
@article{PisBraSchGebAnd:2021:mmf, author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2021}, volume = {21}, number = {1}, pages = {e202100180 (4 pages)} } |
Sarhil, M., Shchyglo, O., Brands, D., Steinbach, I. & Schröder, J. (2021), "Martensitic transformation in a two-dimensional polycrystalline shape memory alloys using a multi-phase-field elasticity model based on pairwise rank-one convexified energies at small strain", Proceedings in Applied Mathematics and Mechanics. Vol. 20(1), pp. e202000200 (2 pages). |
BibTeX:
@article{SarOhcBraSteSch:2021:mti, author = {M. Sarhil and O. Shchyglo and D. Brands and I. Steinbach and J. Schröder}, title = {Martensitic transformation in a two-dimensional polycrystalline shape memory alloys using a multi-phase-field elasticity model based on pairwise rank-one convexified energies at small strain}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2021}, volume = {20}, number = {1}, pages = {e202000200 (2 pages)} } |
Storm, J., Pise, M., Brands, D., Schröder, J. & M., K. (2021), "A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concrete", Engineering Fracture Mechanics. Vol. 243, pp. 107506 (21 pages). |
BibTeX:
@article{StoPisBraSchKal:2021:acs, author = {Storm, J. and Pise, M. and Brands, D. and Schröder, J. and Kaliske M.}, title = {A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concrete}, journal = {Engineering Fracture Mechanics}, year = {2021}, volume = {243}, pages = {107506 (21 pages)}, note = {10.1016/j.engfracmech.2020.107506} } |
Behrens, B.-A., Schröder, J., Wester, H., Brands, D., Uebing, S. & Kock, C. (2021), "Experimental and numerical investigations on the development and stability of residual stresses arising from hot forming processes", 13th ICTP. , pp. 2289-2301. |
BibTeX:
@article{UebBraSchKocWesBehSch:2021:ean, author = {Behrens, B.-A. and Schröder, J. and Wester, H. and Brands, D. and Uebing, S. and Kock, C.}, title = {Experimental and numerical investigations on the development and stability of residual stresses arising from hot forming processes}, journal = {13th ICTP}, year = {2021}, pages = {2289--2301} } |
Uebing, S., Brands, D., Scheunemann, L., Kock, C., Wester, H., Behrens, B.-A. & Schröder, J. (2021), "Residual Stresses in Hot Bulk Formed Parts - A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation", 13th ICTP. , pp. 2345-2355. |
BibTeX:
@article{UebBraSchKocWesBehSch:2021:rsi, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Kock, C. and Wester, H. and Behrens, B.-A. and Schröder, J.}, title = {Residual Stresses in Hot Bulk Formed Parts - A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation}, journal = {13th ICTP}, year = {2021}, pages = {2345--2355} } |
Uebing, S., Brands, D., Scheunemann, L. & Schröder, J. (2021), "On the evolution of residual stresses due to cooling considering martensitic phase transformation", Proceedings in Applied Mathematics and Mechanics. |
BibTeX:
@article{UebBraSchSch:2021:ote, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Schröder, J.}, title = {On the evolution of residual stresses due to cooling considering martensitic phase transformation}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2021}, note = {10.1002/pamm.202100031}, doi = {http://doi.org/10.1002/pamm.202100031} } |
Uebing, S., Brands, D., Scheunemann, L. & Schröder, J. (2021), "Residual stresses in hot bulk formed parts: two-scale approach for austenite-to-martensite phase transformation", Archive of Applied Mechanics. Vol. 91, pp. 545-562. |
BibTeX:
@article{UebBraSchSch:2021:rsi, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Schröder, J.}, title = {Residual stresses in hot bulk formed parts: two-scale approach for austenite-to-martensite phase transformation}, journal = {Archive of Applied Mechanics}, year = {2021}, volume = {91}, pages = {545--562}, doi = {http://doi.org/10.1007/s00419-020-01836-7} } |
Uebing, S., Brands, D., Scheunemann, L. & Schröder, J. (2021), "Residual stresses in hot bulk formed parts: microscopic stress analysis for austenite-to-martensite phase transformation", Archive of Applied Mechanics. , pp. (23 pages). |
BibTeX:
@article{UebBraSchSch:2021:rsi2, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Schröder, J.}, title = {Residual stresses in hot bulk formed parts: microscopic stress analysis for austenite-to-martensite phase transformation}, journal = {Archive of Applied Mechanics}, year = {2021}, pages = {(23 pages)}, note = {10.1007/s00419-021-01921-5}, doi = {http://doi.org/10.1007/s00419-021-01921-5} } |
Klawonn, A., Lanser, M., Uran, M., Rheinbach, O., Köhler, S., Schröder, Jö., Scheunemann, L., Brands, D., Balzani, D., Gandhi, A., Wellein, G., Wittmann, M., Schenk, O. & Janalík, R. (2020), "EXASTEEL: Towards a Virtual Laboratory for the Multiscale Simulation of Dual-Phase Steel Using High-Performance Computing", In Software for Exascale Computing - SPPEXA 2016-2019. Cham , pp. 351-404. Springer International Publishing. |
BibTeX:
@incollection{KlaLanUra:2020:eta, author = {Klawonn, Axel and Lanser, Martin and Uran, Matthias and Rheinbach, Oliver and Köhler, Stephan and Schröder, Jörg and Scheunemann, Lisa and Brands, Dominik and Balzani, Daniel and Gandhi, Ashutosh and Wellein, Gerhard and Wittmann, Markus and Schenk, Olaf and Janalík, Radim}, title = {EXASTEEL: Towards a Virtual Laboratory for the Multiscale Simulation of Dual-Phase Steel Using High-Performance Computing}, booktitle = {Software for Exascale Computing - SPPEXA 2016-2019}, publisher = {Springer International Publishing}, year = {2020}, pages = {351--404} } |
Pise, M., Brands, D., Schröder, J., Gebuhr, G. & Anders, S. (2020), "On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study", Proceedings in Applied Mathematics and Mechanics. Vol. 20(1), pp. e202000323 (4 pages). |
BibTeX:
@article{PisBraSchGebAnd:2020:ota, author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2020}, volume = {20}, number = {1}, pages = {e202000323 (4 pages)} } |
Uebing, S., Brands, D., Scheunemann, L. & Schröder, J. (2020), "A numerical study of the effect of phase evolution on residual stresses during cooling", Proceedings in Applied Mathematics and Mechanics. |
BibTeX:
@article{UebBraSchSch:2020:ans, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Schröder, J.}, title = {A numerical study of the effect of phase evolution on residual stresses during cooling}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2020}, note = {10.1002/pamm.202000236}, doi = {http://doi.org/10.1002/pamm.202000236} } |
Vajragupta, N., Maassen, S., Clausmeyer, T., Brands, D., Schröder, J. & Hartmaier, A. (2020), "Micromechanical Modeling of DP600 steel: From Microstructure to The Sheet Metal Forming Process", Procedia Manufacturing. Vol. 47, pp. 1540-1547. |
BibTeX:
@article{VajMaaClaBraSchHar:2020:mmo, author = {N. Vajragupta and S. Maassen and T. Clausmeyer and D. Brands and J. Schröder and A. Hartmaier}, title = {Micromechanical Modeling of DP600 steel: From Microstructure to The Sheet Metal Forming Process}, journal = {Procedia Manufacturing}, year = {2020}, volume = {47}, pages = {1540--1547}, note = {23rd International Conference on Material Forming} } |
Behrens, B.-A., Schröder, J., Brands, D., Scheunemann, L., Niekamp, R., Chugreev, A., Sarhil, M., Uebing, S. & Kock, C. (2019), "Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505", Metals. Vol. 9(4), pp. 480 (28 pages). |
BibTeX:
@article{BehSchBraSchNieChuSarUebKoc:2019:ean, author = {Behrens, B.-A. and Schröder, J. and Brands, D. and Scheunemann, L. and Niekamp, R. and Chugreev, A. and Sarhil, M. and Uebing, S. and Kock, C.}, title = {Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505}, journal = {Metals}, year = {2019}, volume = {9}, number = {4}, pages = {480 (28 pages)} } |
Behrens, B.-A., Schröder, J., Brands, D., Scheunemann, L., Niekamp, R., Chugreev, A., Sarhil, M., Uebing, S. & Kock, C. (2019), "Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505", Metals. Vol. 9(4), pp. 480 (28 pages). |
BibTeX:
@article{BraChuKocNieSchUebBehSch:2019:ean, author = {Behrens, B.-A. and Schröder, J. and Brands, D. and Scheunemann, L. and Niekamp, R. and Chugreev, A. and Sarhil, M. and Uebing, S. and Kock, C.}, title = {Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505}, journal = {Metals}, year = {2019}, volume = {9}, number = {4}, pages = {480 (28 pages)} } |
Brands, D., Scheunemann, L. & Schröder, J. (2019), "Multiscale Simulation of Dual Phase Steels by Means of Statistically Similar RVEs", In Proccedings of the ``Forming Technology Forum 2019''. TU Munich, Germany. September 19-20, 2019. |
BibTeX:
@inproceedings{BraSchSch:2019:mso, author = {D. Brands and L. Scheunemann and J. Schröder}, title = {Multiscale Simulation of Dual Phase Steels by Means of Statistically Similar RVEs}, booktitle = {Proccedings of the ``Forming Technology Forum 2019''}, year = {2019} } |
Gebuhr, G., Pise, M., Sarhil, M., Anders, S., Brands, D. & Schröder, J. (2019), "Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models", Structural Concrete. Vol. 20(4), pp. 1254-1264. |
BibTeX:
@article{GebPisSarAndBraSch:2019:aae, author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.}, title = {Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models}, journal = {Structural Concrete}, year = {2019}, volume = {20}, number = {4}, pages = {1254-1264}, note = {10.1002/suco.201900034} } |
Gebuhr, G., Pise, M., Sarhil, M., Anders, S., Brands, D. & Schröder, J. (2019), "Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling", Proceedings of the fib Symposium., In Concrete Innovations in Materials, Design and Structures, 16th fib Symposium Proceedings. FIB CEB-FIP. |
BibTeX:
@incollection{GebPisSarAndBraSch:2019:daa, author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.}, title = {Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling}, booktitle = {Concrete Innovations in Materials, Design and Structures, 16th fib Symposium Proceedings}, journal = {Proceedings of the fib Symposium}, publisher = {FIB CEB-FIP}, year = {2019} } |
Gebuhr, G., Pise, M., Sarhil, M., Anders, S., Brands, D. & Schröder, J. (2019), "Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue", In Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa. London Taylor & Francis Group. |
BibTeX:
@incollection{GebPisSarAndBraSch:2019:ddo, author = {G.~Gebuhr and M.~Pise and M.~Sarhil and S.~Anders and D.~Brands and J.~Schröder and}, title = {Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue}, booktitle = {Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa}, publisher = {Taylor & Francis Group}, year = {2019} } |
Pise, M., Brands, D., Gebuhr, G., Schröder, J. & Anders, S. (2019), "Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation", Proceedings in Applied Mathematics and Mechanics. Vol. 19(1), pp. e201900255 (4 pages). |
BibTeX:
@article{PisBraGebSchAnd:2018:epp, author = {M.~Pise and D.~Brands and G.~Gebuhr and J.~Schröder and S.~Anders}, title = {Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2019}, volume = {19}, number = {1}, pages = {e201900255 (4 pages)} } |
Pise, M., Brands, D., Sarhil, M., Schröder, J., Gebuhr, G. & Anders, S. (2019), "Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete", In Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa. London Taylor & Francis Group. |
BibTeX:
@incollection{PisBraSarSchGebAnd:2019:nco, author = {M.~Pise and D.~Brands and M.~Sarhil and J.~Schröder and G.~Gebuhr and S.~Anders}, title = {Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete}, booktitle = {Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa}, publisher = {Taylor & Francis Group}, year = {2019} } |
Uebing, S., Brands, D., Scheunemann, L., M., S., Niekamp, R., Kock, C., Chugreev, A., Behrens, B.-A. & Schröder, J. (2019), "Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling", Proceedings in Applied Mathematics and Mechanics. Vol. 19(1), pp. e201900017 (2 pages). |
BibTeX:
@article{UebBraSchSarNieKocChuBehSch:2019:nao, author = {Uebing, S. and Brands, D. and Scheunemann, L. and Sarhil. M. and Niekamp, R. and Kock, C. and Chugreev, A. and Behrens, B.-A. and Schröder, J.}, title = {Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2019}, volume = {19}, number = {1}, pages = {e201900017 (2 pages)} } |
Uebing, S., Scheunemann, L., Brands, D. & Schröder, J. (2019), "Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts", In Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. Kassel, Germany. August, 28-30 2019., pp. 235-238. |
BibTeX:
@inproceedings{UebSchBraSch:2019:nte, author = {Uebing, S. and Scheunemann, L. and Brands, D. and Schröder, J.}, title = {Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts}, booktitle = {Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry}, year = {2019}, pages = {235--238} } |
Uebing, S., Scheunemann, L., Brands, D. & Schröder, J. (2019), "Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts", In XV International Conference on Computational Plasticity - Fundamentals and Applications. Barcelona, Spain. September 3--5 2019., pp. 223-234. |
BibTeX:
@inproceedings{UebSchBraSch:2019:ntep, author = {Uebing, S. and Scheunemann, L. and Brands, D. and Schröder, J.}, title = {Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts}, booktitle = {XV International Conference on Computational Plasticity - Fundamentals and Applications}, year = {2019}, pages = {223--234} } |
Brands, D., Chugreev, A., Kock, C., Niekamp, R., Scheunemann, L., Uebing, S., Behrens, B.-A. & Schröder, J. (2018), "On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800256 (4 pages). |
BibTeX:
@article{BraChuKocNieSchUebBehSch:2018:ota, author = {Brands, D. and Chugreev, A. and Kock, C. and Niekamp, R. and Scheunemann, L. and Uebing, S. and Behrens, B.-A. and Schröder, J.}, title = {On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2018}, volume = {18}, number = {1}, pages = {e201800256 (4 pages)} } |
Gandhi, A., Balzani, D., Brands, D., Scheunemann, L. & Schröder, Jö. (2018), "A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800321 (2 pages). |
BibTeX:
@article{GanBalBraSchSch:2018:act, author = {Gandhi, Ashutosh and Balzani, Daniel and Brands, Dominik and Scheunemann, Lisa and Schröder, Jörg}, title = {A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2018}, volume = {18}, number = {1}, pages = {e201800321 (2 pages)} } |
Niekamp, R., Brands, D., Götzen, C., Kiseleva, M., Niekamp, J., Schröder, J. & Siems, O. (2018), "A Stochastic Model for Strong Wind Events in Central Europe based on Historical Wind Data", Proceedings in Applied Mathematics and Mechanics. Vol. 18, pp. e201800365 (2 pages). |
BibTeX:
@article{NieBraGoeKisNieSchSie:2018:asm, author = {R. Niekamp and D. Brands and C. Götzen and M. Kiseleva and J. Niekamp and J. Schröder and O. Siems}, title = {A Stochastic Model for Strong Wind Events in Central Europe based on Historical Wind Data}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2018}, volume = {18}, pages = {e201800365 (2 pages)} } |
Pise, M., Brands, D., Gebuhr, G., Schröder, J. & Anders, S. (2018), "Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800401 (4 pages). |
BibTeX:
@article{PisBraGebSchAnd:2018:aop, author = {M.~Pise and D.~Brands and G.~Gebuhr and J.~Schröder and S.~Anders}, title = {Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2018}, volume = {18}, number = {1}, pages = {e201800401 (4 pages)} } |
Pise, M., Brands, D., Gebuhr, G., Schröder, J. & Anders, S. (2018), "Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling", Proceedings in Applied Mathematics and Mechanics. , pp. #e201800401#. |
BibTeX:
@article{PisBrGeSchAn:2018:aop, author = {M.~Pise and D.~Brands and G.~Gebuhr and J.~Schröder and S.~Anders}, title = {Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2018}, pages = {#e201800401#} } |
Baron, T., Khlopkov, K., Pretorius, T., Balzani, D., Brands, D. & Schröder, J. (2016), "Modeling of Microstructure Evolution with Dynamic Recrystallization in Finite Element Simulations of Martensitic Steel", steel research international. Vol. 87(1), pp. 37-45. |
BibTeX:
@article{BarKhlPreBalBraSch:2016:mom, author = {Baron, T.J. and Khlopkov, K. and Pretorius, T. and Balzani, D. and Brands, D. and Schröder, J.}, title = {Modeling of Microstructure Evolution with Dynamic Recrystallization in Finite Element Simulations of Martensitic Steel}, journal = {steel research international}, year = {2016}, volume = {87}, number = {1}, pages = {37--45}, url = {http://dx.doi.org/10.1002/srin.201400576}, doi = {http://doi.org/10.1002/srin.201400576} } |
Brands, D., Balzani, D., Scheunemann, L., Schröder, J., Richter, H. & Raabe, D. (2016), "Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data", Archive of Applied Mechanics. Vol. 86, pp. 575-598. Springer Berlin Heidelberg. |
BibTeX:
@article{BraBalSchSchRicRaa:2016:cmo, author = {Brands, D. and Balzani, D. and Scheunemann, L. and Schröder, J. and Richter, H. and Raabe, D.}, title = {Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data}, journal = {Archive of Applied Mechanics}, publisher = {Springer Berlin Heidelberg}, year = {2016}, volume = {86}, pages = {575--598}, url = {http://dx.doi.org/10.1007/s00419-015-1044-1}, doi = {http://doi.org/10.1007/s00419-015-1044-1} } |
Maike, S., Bluhm, J., Schröder, J., Brands, D. & Ricken, T. (2016), "Macroscopic characterization of porous unit cells within the framework of the theory of porous media", In Insights and Innovations in Structural Engineering, Mechanics and Computation. Cape Town, South Africa , pp. 400-406. CRC Press. |
BibTeX:
@incollection{MaiBluSchBraRic:2016:mco, author = {Maike, S. and Bluhm, J. and Schröder, J. and Brands, D. and Ricken, T.}, title = {Macroscopic characterization of porous unit cells within the framework of the theory of porous media}, booktitle = {Insights and Innovations in Structural Engineering, Mechanics and Computation}, publisher = {CRC Press}, year = {2016}, pages = {400--406} } |
Scheunemann, L., Schröder, J. & Brands, D. (2016), "Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure", In Insights and Innovations in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 433-438. CRC Press. |
BibTeX:
@incollection{SchSchBra:2016:myc, author = {L. Scheunemann and J. Schröder and D. Brands}, title = {Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure}, booktitle = {Insights and Innovations in Structural Engineering, Mechanics & Computation}, publisher = {CRC Press}, year = {2016}, pages = {433--438} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals", Mechanics of Materials. Vol. 90, pp. 185-201. |
BibTeX:
@article{SchBalBraSch:2014:do3, author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder}, title = {Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals}, journal = {Mechanics of Materials}, year = {2015}, volume = {90}, pages = {185--201}, url = {http://dx.doi.org/10.1016/j.mechmat.2015.03.005}, doi = {10.1016-j.mechmat.2015.03.005} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures", In Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications. Montego Bay, Jamaica. January 4-9 2015. |
BibTeX:
@inproceedings{SchBalBraSch:2015:aco, author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.}, title = {A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures}, booktitle = {Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications}, year = {2015} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Construction of Statistically Similar RVEs", In Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78). Springer. |
BibTeX:
@incollection{SchBalBraSch:2015:cos, author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder}, title = {Construction of Statistically Similar RVEs}, booktitle = {Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78)}, publisher = {Springer}, year = {2015} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Study on statistically similar RVEs for real microstructures based on different statistical descriptors", Proceedings in Applied Mathematics and Mechanics. Vol. 15(1), pp. 467-468. WILEY-VCH Verlag. |
BibTeX:
@article{SchBalBraSch:2015:sos, author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.}, title = {Study on statistically similar RVEs for real microstructures based on different statistical descriptors}, journal = {Proceedings in Applied Mathematics and Mechanics}, publisher = {WILEY-VCH Verlag}, year = {2015}, volume = {15}, number = {1}, pages = {467--468}, url = {http://dx.doi.org/10.1002/pamm.201510224}, doi = {http://doi.org/10.1002/pamm.201510224} } |
Schröder, J., Labusch, M., Keip, M.-A., Kiefer, B., Brands, D. & Lupascu., D. (2015), "Computation of non-linear magneto-electric product properties of 0-3 composites", GAMM-Mitteilungen. Vol. 38, pp. 8-24. |
BibTeX:
@article{SchLabKeiKieBraLup:2015:con, author = {J. Schröder and M. Labusch and M.-A. Keip and B. Kiefer and D. Brands and D.C. Lupascu.}, title = {Computation of non-linear magneto-electric product properties of 0-3 composites}, journal = {GAMM-Mitteilungen}, year = {2015}, volume = {38}, pages = {8--24} } |
Balzani, D., Brands, D. & Schröder, J. (2014), "Construction of Statistically Similar Representative Volume Elements", In Plasticity and Beyond, CISM Lecture Notes 550. , pp. 355-400. Springer. |
BibTeX:
@incollection{BalBraSch:2014:cos, author = {Balzani, D. and Brands, D. and Schröder, J.}, title = {Construction of Statistically Similar Representative Volume Elements}, booktitle = {Plasticity and Beyond, CISM Lecture Notes 550}, publisher = {Springer}, year = {2014}, pages = {355--400} } |
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2014), "Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations", Computational Mechanics. Vol. 54, pp. 1269-1284. |
BibTeX:
@article{BalSchBraSch:2014:cot, author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder}, title = {Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations}, journal = {Computational Mechanics}, year = {2014}, volume = {54}, pages = {1269--1284} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2014), "Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs", Proceedings in Applied Mathematics and Mechanics. Vol. submitted |
BibTeX:
@article{SchBraBalSch:2014:cos, author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.}, title = {Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2014}, volume = {submitted} } |
Scheunemann, L., Brands, D., Balzani, D. & Schröder, J. (2014), "Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals", In Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). |
BibTeX:
@inproceedings{SchBraBalSch:2014:csf, author = {L. Scheunemann and D. Brands and D. Balzani and J. Schröder}, title = {Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals}, booktitle = {Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)}, year = {2014} } |
Schröder, J., Brinkhues, S., Brands, D. & von Hoegen, M. (2014), "Simulation of arterial walls under condsideration of residual stresses - A numerical approach", Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). |
BibTeX:
@article{SchBriBraHoe:2014:soa, author = {J.~Schröder and S.~Brinkhues and D.~Brands and M.~von~Hoegen}, title = {Simulation of arterial walls under condsideration of residual stresses - A numerical approach}, journal = {Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)}, year = {2014} } |
Scheunemann, L., Schröder, J., Balzani, D. & Brands, D. (2014), "Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors", Procedia Engineering. Vol. 81, pp. 1360-1365. |
BibTeX:
@article{SchSchBalBra:2014:cos, author = {L. Scheunemann and J. Schröder and D. Balzani and D. Brands}, title = {Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors}, journal = {Procedia Engineering}, year = {2014}, volume = {81}, pages = {1360-1365} } |
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2013), "Construction of 3D statistically similar RVEs for dual-phase steel microstructures", In XII International Conference on Computational Plasticity. Fundamentals and Applications. Barcelona, Spain. September 3-5 2013. |
BibTeX:
@inproceedings{BalSchBraSch:2013:cos, author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder}, title = {Construction of 3D statistically similar RVEs for dual-phase steel microstructures}, booktitle = {XII International Conference on Computational Plasticity. Fundamentals and Applications}, year = {2013} } |
Balzani, D., Schröder, J., Brands, D. & Scheunemann, L. (2013), "Simulation of dual phase steels based on three-dimensional statistically similar RVEs", In Proceedings of the 19th International Symposium on Plasticity and its Current Applications. Nassau, Bahamas. January 3-8 2013. |
BibTeX:
@inproceedings{BalSchBraSch:2013:sod, author = {D. Balzani and J. Schröder and D. Brands and L. Scheunemann}, title = {Simulation of dual phase steels based on three-dimensional statistically similar RVEs}, booktitle = {Proceedings of the 19th International Symposium on Plasticity and its Current Applications}, year = {2013} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2013), "Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures", Proceedings in Applied Mathematics and Mechanics. Vol. 13, pp. 271-272. |
BibTeX:
@article{SchBalBraSch:2013:dss, author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.}, title = {Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2013}, volume = {13}, pages = {271--272} } |
Scheunemann, L., Balzani, D., Brands, D., Schröeder, J. & Raabe, D. (2013), "Statistically similar RVE construction based on 3D dual-phase steel microstructures", In Research and Applications in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 411-416. CRC Press, Taylor & Francis Group, London. |
BibTeX:
@incollection{SchBalBraSchRaa:2013:ssr, author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröeder and D. Raabe}, title = {Statistically similar RVE construction based on 3D dual-phase steel microstructures}, booktitle = {Research and Applications in Structural Engineering, Mechanics & Computation}, publisher = {CRC Press, Taylor & Francis Group, London}, year = {2013}, pages = {411--416} } |
Balzani, D., Böse, D., Brands, D., Erbel, R., Klawonn, A., Rheinbach, O. & Schröder, J. (2012), "Parallel Simulation of Patient-specific Atherosclerotic Arteries for the Enhancement of Intravascular Ultrasound Diagnostics", Engineering Computations. Vol. 29(8), pp. 888-906. |
BibTeX:
@article{BalBoeBraErbKlaRheSch:2010:pso, author = {Balzani, D. and Böse, D. and Brands, D. and Erbel, R. and Klawonn, A. and Rheinbach, O. and Schröder, J.}, title = {Parallel Simulation of Patient-specific Atherosclerotic Arteries for the Enhancement of Intravascular Ultrasound Diagnostics}, journal = {Engineering Computations}, year = {2012}, volume = {29}, number = {8}, pages = {888--906} } |
Balzani, D., Schröder, J. & Brands, D. (2012), "Construction of Statistically Similar Representative Volume Elements for Dual Phase Steels", In Proceedings of the 18th International Symposium on Plasticity and its Current Applications, San Juan, Puerto Rico. Januar 3-8 2012. |
BibTeX:
@inproceedings{BalSchBra:2012:cos, author = {Balzani, D. and Schröder, J. and Brands, D.}, title = {Construction of Statistically Similar Representative Volume Elements for Dual Phase Steels}, booktitle = {Proceedings of the 18th International Symposium on Plasticity and its Current Applications, San Juan, Puerto Rico}, year = {2012} } |
Brands, D. (2012), "Geometrical Modeling and Numerical Simulation of Heterogeneous Materials". School: Universität Duisburg-Essen. |
BibTeX:
@phdthesis{Bra:2012:, author = {Brands, D.}, title = {Geometrical Modeling and Numerical Simulation of Heterogeneous Materials}, school = {Universität Duisburg-Essen}, year = {2012}, note = {Report No. 10 (2012) of the Institut für Mechanik, Universität Duisburg-Essen} } |
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2012), "Construction of Statistically Similar RVEs for 3D Microstructures", Proceedings of Applied Mathematics and Mechanics. Vol. 12(1), pp. 429-430. |
BibTeX:
@article{SchBalBraSch:2012:cos, author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.}, title = {Construction of Statistically Similar RVEs for 3D Microstructures}, journal = {Proceedings of Applied Mathematics and Mechanics}, year = {2012}, volume = {12}, number = {1}, pages = {429--430} } |
Schröder, J., Balzani, D., Brands, D. & Scheunemann, L. (2012), "On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming", In Proceedings of the ``Forming Technology Forum 2012''. ETH Zurich, Switzerland. Juni 5-6, 2012. |
BibTeX:
@inproceedings{SchBalBraSch:2012:oti, author = {J. Schröder and D. Balzani and D. Brands and L. Scheunemann}, title = {On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming}, booktitle = {Proceedings of the ``Forming Technology Forum 2012''}, year = {2012} } |
Schröder, J., Eidel, B., Brands, D. & Balzani, D. (2012), "Nano to Micro - Perspectives for Homogenization in Crystalline Solids", Proceedings of Applied Mathematics and Mechanics. Vol. 12, pp. 19-22. |
BibTeX:
@article{SchEidBraBal:2012:ntm, author = {Schröder, J. and Eidel, B. and Brands, D. and Balzani, D.}, title = {Nano to Micro - Perspectives for Homogenization in Crystalline Solids}, journal = {Proceedings of Applied Mathematics and Mechanics}, year = {2012}, volume = {12}, pages = {19--22} } |
Balzani, D., Schröder, J. & Brands, D. (2011), "Simulation of Two-Phase Steels based on Statistically Similar Representative Volume Elements", Proceedings in Applied Mathematics and Mechanics. Vol. 11, pp. 939-942. |
BibTeX:
@article{BalSchBra:2011:sot, author = {D. Balzani and J. Schröder and D. Brands}, title = {Simulation of Two-Phase Steels based on Statistically Similar Representative Volume Elements}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2011}, volume = {11}, pages = {939--942} } |
Balzani, D., Schröder, J. & Brands, D. (2011), "Statistically Similar RVEs for the Simulation of Two-Phase Steels based on Lineal-Path Functions", In Proceedings of the 2nd African Conference on Computational Mechanics (AfriCOMP11). |
BibTeX:
@inproceedings{BalSchBra:2011:ssr, author = {D. Balzani and J. Schröder and D. Brands}, title = {Statistically Similar RVEs for the Simulation of Two-Phase Steels based on Lineal-Path Functions}, booktitle = {Proceedings of the 2nd African Conference on Computational Mechanics (AfriCOMP11)}, year = {2011} } |
Brands, D., Balzani, D., Schröder, J. & Raabe, D. (2011), "Simulation of DP-steels based on statistically similar Representative volume elements and 3D EBSD Data", In Computational Plasticity XI - Fundamentals and Applications. Barcelona, Spain. September 7-9 2011., pp. 1552-1563. |
BibTeX:
@inproceedings{BraBalSchRaa:2011:sod, author = {D. Brands and D. Balzani and J. Schröder and D. Raabe}, title = {Simulation of DP-steels based on statistically similar Representative volume elements and 3D EBSD Data}, booktitle = {Computational Plasticity XI - Fundamentals and Applications}, year = {2011}, pages = {1552--1563} } |
Brands, D., Schröder, J. & Balzani, D. (2011), "On the Incorporation of Microstructural Information in Dual Phase Steel Simulations", In Proccedings of the 10th International Conference of Technology of Plasticity, ICTP 2011. Aachen. September, 25-30 2011. |
BibTeX:
@inproceedings{BraSchBal:2011:oti, author = {D. Brands and J. Schröder and D. Balzani}, title = {On the Incorporation of Microstructural Information in Dual Phase Steel Simulations}, booktitle = {Proccedings of the 10th International Conference of Technology of Plasticity, ICTP 2011}, year = {2011} } |
Brands, D., Schröder, J. & Balzani, D. (2011), "Statistically Similar Reconstruction of Dual-Phase Steel Microstructures for Engineering Applications", In Proceedings of the 19th International Conference on Computer Methods in Mechanics, CMM 2011. Warschau, Polen. Mai, 9-12 2011. |
BibTeX:
@inproceedings{BraSchBal:2011:ssr, author = {D. Brands and J. Schröder and D. Balzani}, title = {Statistically Similar Reconstruction of Dual-Phase Steel Microstructures for Engineering Applications}, booktitle = {Proceedings of the 19th International Conference on Computer Methods in Mechanics, CMM 2011}, year = {2011} } |
Brands, D., Schröder, J., Balzani, D., Dmitrieva, O. & Raabe, D. (2011), "On the Reconstruction and Computation of Dual-Phase Steel Microstructures Based on 3D EBSD Data", Proceedings in Applied Mathematics and Mechanics. Vol. 11, pp. 503-504. |
BibTeX:
@article{BraSchBalDmiRaa:2011:otr, author = {D. Brands and J. Schröder and D. Balzani and O. Dmitrieva and D. Raabe}, title = {On the Reconstruction and Computation of Dual-Phase Steel Microstructures Based on 3D EBSD Data}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2011}, volume = {11}, pages = {503--504} } |
Schröder, J., Balzani, D. & Brands, D. (2011), "Approximation of Random Microstructures by Periodic Statistically Similar Representative Volume Elements based on Lineal-Path Functions.", Archive of Applied Mechanics. Vol. 81(7), pp. 975-997. |
BibTeX:
@article{SchBalBra:2011:aor, author = {Schröder, J. and Balzani, D. and Brands, D.}, title = {Approximation of Random Microstructures by Periodic Statistically Similar Representative Volume Elements based on Lineal-Path Functions.}, journal = {Archive of Applied Mechanics}, year = {2011}, volume = {81}, number = {7}, pages = {975--997} } |
Schröder, J., Balzani, D. & Brands, D. (2011), "Efficient FE$^2$-Simulations using Statistically Similar RVEs", In Proceedings of the International Symposium on Plasticity 2011. Puerto Vallarta, Mexiko. Januar, 3-8 2011. |
BibTeX:
@inproceedings{SchBalBra:2011:efs, author = {J. Schröder and D. Balzani and D. Brands}, title = {Efficient FE$^2$-Simulations using Statistically Similar RVEs}, booktitle = {Proceedings of the International Symposium on Plasticity 2011}, year = {2011} } |
Balzani, D., Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2010), "On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategies", Archive of Applied Mechanics. Vol. 80, pp. 479-488. |
BibTeX:
@article{BalBraKlaRheSch:2010:otm, author = {D. Balzani and D. Brands and A. Klawonn and O. Rheinbach and J. Schröder}, title = {On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategies}, journal = {Archive of Applied Mechanics}, year = {2010}, volume = {80}, pages = {479--488} } |
Balzani, D., Brands, D. & Schröder, J. (2010), "Construction of Statistically Similar Representative Volume Elements for FE$^2$-Simulations based on the Lineal-Path Function", In Proceedings of the 4th European Conference on Computational Mechanics (ECCM). |
BibTeX:
@inproceedings{BalBraSch:2010:cos, author = {Balzani, D. and Brands, D. and Schröder, J.}, title = {Construction of Statistically Similar Representative Volume Elements for FE$^2$-Simulations based on the Lineal-Path Function}, booktitle = {Proceedings of the 4th European Conference on Computational Mechanics (ECCM)}, year = {2010} } |
Balzani, D., Schröder, J. & Brands, D. (2010), "FE$^2$-simulation of micro-heterogeneous steels based on statistically similar RVE's", In IUTAM-Symposium on Variational Concepts with Applications to the Mechanics of Materials. Volume 21 |
BibTeX:
@inproceedings{BalSchBra:2010:fso, author = {D. Balzani and J. Schröder and D. Brands}, title = {FE$^2$-simulation of micro-heterogeneous steels based on statistically similar RVE's}, booktitle = {IUTAM-Symposium on Variational Concepts with Applications to the Mechanics of Materials}, year = {2010}, volume = {21} } |
Brands, D., Balzani, D. & Schröder, J. (2010), "On the FE$^2$-Simulation using Statistically Similar Representative Volume Elements based on the Lineal-Path Function", Proceedings in Applied Mathematics and Mechanics. Vol. 10, pp. 399-400. |
BibTeX:
@article{BalSchBra:2010:otf, author = {D. Brands and D. Balzani and J. Schröder}, title = {On the FE$^2$-Simulation using Statistically Similar Representative Volume Elements based on the Lineal-Path Function}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2010}, volume = {10}, pages = {399--400} } |
Balzani, D., Schröder, J. & Brands, D. (2010), "Statistically Similar Representative Volume Elements based on Lineal-Path Functions", In Report of the Workshop 1011 at the ``Mathematisches Forschungsinstitut Oberwolfach'' entitled ``Microstructures in Solids: From Quantum Models to Continua'', organized by A. Mielke and M. Ortiz. |
BibTeX:
@inproceedings{BalSchBra:2010:ssr, author = {Balzani, D. and Schröder, J. and Brands, D.}, title = {Statistically Similar Representative Volume Elements based on Lineal-Path Functions}, booktitle = {Report of the Workshop 1011 at the ``Mathematisches Forschungsinstitut Oberwolfach'' entitled ``Microstructures in Solids: From Quantum Models to Continua'', organized by A. Mielke and M. Ortiz}, year = {2010} } |
Schröder, J., Balzani, D. & Brands, D. (2010), "A FE$^2$-Homogenization Technique for Two-Phase Steels based on Statistically Similar Representative Volume Elements", In Proceedings of the International Symposium of Plasticity 2010. St. Kitts, St. Kitts und Nevis. Januar, 3-8 2010. Neat press. |
BibTeX:
@inproceedings{SchBalBra:2010:afh, author = {Schröder, J. and Balzani, D. and Brands, D.}, title = {A FE$^2$-Homogenization Technique for Two-Phase Steels based on Statistically Similar Representative Volume Elements}, booktitle = {Proceedings of the International Symposium of Plasticity 2010}, publisher = {Neat press}, year = {2010} } |
Balzani, D., Brands, D., Schröder, J. & Carstensen, C. (2009), "Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least--square functionals", Technische Mechanik. Vol. 30, pp. 297-315. |
BibTeX:
@article{BalBraSchCar:2009:sao, author = {D. Balzani and D. Brands and J. Schröder and C. Carstensen}, title = {Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least--square functionals}, journal = {Technische Mechanik}, year = {2009}, volume = {30}, pages = {297--315} } |
Balzani, D., Schröder, J. & Brands, D. (2009), "Modeling of two-phase steels based on statistically similar microstructures", In Proceedings of the Conference on Computer Methods in Mechanics 2009. Zielona Gora, Poland. |
BibTeX:
@inproceedings{BalSchBra:2009:mot, author = {D. Balzani and J. Schröder and D. Brands}, title = {Modeling of two-phase steels based on statistically similar microstructures}, booktitle = {Proceedings of the Conference on Computer Methods in Mechanics 2009}, year = {2009} } |
Balzani, D., Schröder, J. & Brands, D. (2009), "Statistically similar RVEs for FE$^2$-simulations". Mathematisches Forschungsinstitut OberwolfachMathematisches Forschungsinstitut Oberwolfach, Technical Report Report No. 29/2009, 1604--1606, 2009. |
BibTeX:
@techreport{BalSchBra:2009:ssr, author = {D. Balzani and J. Schröder and D. Brands}, title = {Statistically similar RVEs for FE$^2$-simulations}, school = {Mathematisches Forschungsinstitut Oberwolfach}, year = {2009}, number = {Report No. 29/2009, 1604--1606} } |
Balzani, D., Schröder, J., Brands, D. & Carstensen, C. (2009), "FE$^2$-simulations in elasto-plasticity using statistically similar reprensentative volume elements", Proceedings in Applied Mathematics and Mechanics. Vol. 9, pp. 39-42. |
BibTeX:
@article{BalSchBraCar:2009:fsi, author = {D. Balzani and J. Schröder and D. Brands and C. Carstensen}, title = {FE$^2$-simulations in elasto-plasticity using statistically similar reprensentative volume elements}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2009}, volume = {9}, pages = {39--42} } |
Brands, D., Schröder, J., Klawonn, A., Rheinbach, O., Böse, D. & Erbel, R. (2009), "Numerical simulation of aterial walls based on IVUS-data", Proceedings in Applied Mathematics and Mechanics. Vol. 9, pp. 75-78. |
BibTeX:
@article{BraSchKlaRheBoeErb:2009:nso, author = {D. Brands and J. Schröder and A. Klawonn and O. Rheinbach and D. Böse and R. Erbel}, title = {Numerical simulation of aterial walls based on IVUS-data}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2009}, volume = {9}, pages = {75--78} } |
Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2008), "Modelling and convergence in arterial wall simulations using a parallel FETI solution strategy", Computer Methods in Biomechanics and Biomedical Engineering. Vol. 11, pp. 569-583. |
BibTeX:
@article{BraKlaRheSch:2008:mac, author = {D. Brands and A. Klawonn and O. Rheinbach and J. Schröder}, title = {Modelling and convergence in arterial wall simulations using a parallel FETI solution strategy}, journal = {Computer Methods in Biomechanics and Biomedical Engineering}, year = {2008}, volume = {11}, pages = {569--583} } |
Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2008), "On the visualization of patient specific arterial geometries using the virtual histology", Proceedings in Applied Mathematics and Mechanics. Vol. 8, pp. 10169-10170. |
BibTeX:
@article{BraKlaRheSch:2008:otv, author = {D. Brands and A. Klawonn and O. Rheinbach and J. Schröder}, title = {On the visualization of patient specific arterial geometries using the virtual histology}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2008}, volume = {8}, pages = {10169--10170} } |
Balzani, D., Klawonn, A., Rheinbach, O., Schröder, J. & Brands, D. (2007), "Simulation of arterial walls using FETI domain decomposition methods", In Proceedings of the ECCOMAS Conference: Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering., pp. 104-105. |
BibTeX:
@inproceedings{BalKlaRheSchBra:2007:soa, author = {D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder and D. Brands}, title = {Simulation of arterial walls using FETI domain decomposition methods}, booktitle = {Proceedings of the ECCOMAS Conference: Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering}, year = {2007}, pages = {104--105} } |
Balzani, D., Schröder, J., Brands, D., Klawonn, A. & Rheinbach, O. (2007), "Computer simulation of damage in overstretched atherosclerotic arteries", In Proceedings of the III International Congress on Computational Bioengineering., pp. 209-214. |
BibTeX:
@inproceedings{BalSchBraKlaRhe:2007:cso, author = {D. Balzani and J. Schröder and D. Brands and A. Klawonn and O. Rheinbach}, title = {Computer simulation of damage in overstretched atherosclerotic arteries}, booktitle = {Proceedings of the III International Congress on Computational Bioengineering}, year = {2007}, pages = {209--214} } |
Brands, D., Balzani, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2007), "Aspects of modeling and large scale simulation of arterial walls", In ACME 2007 -- Computational Mechanics in the UK: 2007. Glasgow, Scotland, April, 2007. |
BibTeX:
@conference{BraBalKlaRheSch:2007:aom, author = {D. Brands and D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder}, title = {Aspects of modeling and large scale simulation of arterial walls}, booktitle = {ACME 2007 -- Computational Mechanics in the UK: 2007}, year = {2007} } |
Brands, D., Balzani, D., Rheinbach, A.K.O. & Schröder, J. (2007), "Large scale simulation of arterial walls: mechanical modeling", In ICIAM--GAMM 2007. Zürich, Switzerland, Juli, 2007. |
BibTeX:
@conference{BraBalKlaRheSch:2007:lss, author = {D. Brands and D. Balzani and A. Klawonn O. Rheinbach and J. Schröder}, title = {Large scale simulation of arterial walls: mechanical modeling}, booktitle = {ICIAM--GAMM 2007}, year = {2007} } |
Brands, D., Balzani, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2007), "Modeling and computational aspects of arterial walls", In COMPLAS 2007. Barcelona, Spain, September, 2007. |
BibTeX:
@conference{BraBalKlaRheSch:2007:mac, author = {D. Brands and D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder}, title = {Modeling and computational aspects of arterial walls}, booktitle = {COMPLAS 2007}, year = {2007} } |
Rheinbach, O., Klawonn, A., Schröder, J., Balzani, D. & Brands, D. (2007), "Simulation of arterial walls: an algebraic interface to iterative substructuring", In Proceedings of the III International Congress on Computational Bioengineering., pp. 51-56. |
BibTeX:
@inproceedings{RheKlaSchBalBra:2007:soa, author = {O. Rheinbach and A. Klawonn and J. Schröder and D. Balzani and D. Brands}, title = {Simulation of arterial walls: an algebraic interface to iterative substructuring}, booktitle = {Proceedings of the III International Congress on Computational Bioengineering}, year = {2007}, pages = {51--56} } |
Schröder, J., Klawonn, A., Balzani, D., Rheinbach, O. & Brands, D. (2007), "On mechanical modeling of arterial walls and parallel solution strategies", In Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics., pp. 97-107. |
BibTeX:
@inproceedings{SchKlaBalRheBra:2007:omm, author = {J. Schröder and A. Klawonn and D. Balzani and O. Rheinbach and D. Brands}, title = {On mechanical modeling of arterial walls and parallel solution strategies}, booktitle = {Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics}, year = {2007}, pages = {97--107} } |
Brands, D. (2006), "Entwicklung eines Kugelgelenks für PKW-Fahrwerke mit einem hohen Verhältnis von Achslast zur Gelenkdimension". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, DüsseldorfFakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Düsseldorf, 2006. |
BibTeX:
@techreport{Bra:2006:eek, author = {D. Brands}, title = {Entwicklung eines Kugelgelenks für PKW-Fahrwerke mit einem hohen Verhältnis von Achslast zur Gelenkdimension}, school = {Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Düsseldorf}, year = {2006} } |
Brands, D. (2005), "Modulares Fahrzeug in Matlab/Simulink". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechatronik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, AlfdorfFakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechatronik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Alfdorf, 2005. |
BibTeX:
@techreport{Bra:2005:mfi, author = {D. Brands}, title = {Modulares Fahrzeug in Matlab/Simulink}, school = {Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechatronik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Alfdorf}, year = {2005} } |
Brands, D. (2004), "Durchführung einer Verfahrensstudie zum Scherbiegen von Rohren". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit ThyssenKrupp Stahl AG, DuisburgFakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit ThyssenKrupp Stahl AG, Duisburg, 2004. |
BibTeX:
@techreport{Bra:2004:dev, author = {D. Brands}, title = {Durchführung einer Verfahrensstudie zum Scherbiegen von Rohren}, school = {Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit ThyssenKrupp Stahl AG, Duisburg}, year = {2004} } |
Stand: 21.02.2025