Personensuche

Personensuche

Bitte geben Sie den Namen der gesuchten Person ein.

Es wurde 1 Person gefunden.

Anschrift
Lotharstraße 1
47057 Duisburg
Raum
MF 025

Funktionen

  • Universitätsprofessor/in, Strömungsmaschinen

Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.

    Artikel in Zeitschriften

  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    A general model to evaluate the energy barrier to nucleation in vapour system by considering real gas approaches of the equation of state
    In: International Journal of Heat and Mass Transfer Jg. 238 (2025) 126432
  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Method for considering real gas equations of state in through-flow programs
    In: Energy: The international journal Jg. 298 (2024) 131282
  • Schifflechner, Christopher; de Reus, Jasper; Schuster, Sebastian; Corpancho Villasana, Andreas; Brillert, Dieter; Saar, Martin O.; Spliethoff, Hartmut
    Paving the way for CO₂-Plume Geothermal (CPG) systems : A perspective on the CO₂ surface equipment
    In: Energy: The international journal Jg. 305 (2024) 132258
  • Doerr, Tobias; Schuster, Sebastian; Brillert, Dieter
    PDA Laser Measurements of Droplet-Laden Flows ina Four-Stage Axial Compressor
    In: Journal of Turbomachinery Jg. 145 (2023) Nr. 2, 021013
  • Wallat, Stefan; Preibisch, Stefan; Strauch, Matthias; Brillert, Dieter
    A Novel Test Rig Using Air for Investigation of Vibration and Interaction of Two Steam Turbine Control Valves
    In: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 1, 011026
  • Unglaube, Tina; Brillert, Dieter
    Acoustoelastic Modes in Rotor-Cavity Systems : An Overview on Frequency Shift Effects Supported with Measurements
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 2, 15
  • Hacks, Alexander; Abd El Hussein, Ihab; Ren, Haikun; Schuster, Sebastian; Brillert, Dieter; Abd El Hussein, Ihab
    Experimental Data of Supercritical Carbon Dioxide (sCO₂) Compressor at Various Fluid States
    In: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 4, 041012
  • Lapp, Florian Felix; Schuster, Sebastian; Hecker, Simon; Brillert, Dieter
    Experimental Validation of an Analytical Condensation Model for Application in Steam Turbine Design
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 1, 9
  • Tegethoff, Katharina; Schuster, Sebastian; Brillert, Dieter
    Numerical simulation of real gas one-component two-phase flow using a Roe-based scheme
    In: Computers & Fluids Jg. 245 (2022) 105560
  • Hofer, Markus; Ren, Haikun; Hecker, Frieder; Buck, Michael; Brillert, Dieter; Starflinger, Jörg
    Simulation, analysis and control of a self-propelling heat removal system using supercritical CO₂ under varying boundary conditions
    In: Energy: The international journal Jg. 247 (2022) 123500
  • Heinrich, Christoph Rocky; Unglaube, Tina; Beirow, Bernd; Brillert, Dieter; Steff, Klaus; Petry, Nico
    Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems
    In: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 8, 081002
  • Hacks, Alexander; Brillert, Dieter
    Turbomachine Operation with Magnetic Bearings in Supercritical Carbon Dioxide Environment
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 2, 18
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Experimental investigation of centrifugal flow in rotor–stator cavities at high reynolds numbers > 10⁸
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 6 (2021) Nr. 2, 13
  • Luo, Jingjing; Brillert, Dieter
    Experimental investigations on the pressure fluctuations in the sealing gap of Dry gas seals with embedded pressure sensors
    In: Journal of Engineering for Gas Turbines and Power Jg. 143 (2021) Nr. 3, 031005
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cycles
    In: Journal of the Global Power and Propulsion Society Jg. 5 (2021) S. 104 - 110
  • Doerr, T.; Braun, S.; Schuster, Sebastian; Brillert, Dieter
    Proof of concept for a novel interstage injection design in axial compressors
    In: Journal of Engineering for Gas Turbines and Power Jg. 143 (2021) Nr. 6, 061030
  • Schröder, Tilman Raphael; Dohmen, Hans-Josef; Brillert, Dieter; Benra, Friedrich-Karl
    Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential reynolds number range
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 5 (2020) Nr. 2, S. 7
  • Straetz, Marcel; Starflinger, Joerg; Mertz, Rainer; Brillert, Dieter
    Cycle calculations of a small-scale heat removal system with supercritical CO2 as working fluid
    In: Journal of Nuclear Engineering and Radiation Science / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 5 (2019) Nr. 1, 011011
  • Domnick, Clemens Bernhard; Brillert, Dieter
    Flow-induced steam valve vibrations : a literature review of excitation mechanisms, preventive measures, and design improvements
    In: Journal of Engineering for Gas Turbines and Power Jg. 141 (2019) Nr. 5, 051009
  • Hacks, Alexander Johannes; Schuster, Sebastian; Brillert, Dieter;
    Stabilizing effects of supercritical CO₂ fluid properties on compressor operation
    13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC2019): Lausanne, Switzerland; 8–12 April 2019,
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 4 (2019) Nr. 3, 20
  • Schuster, Sebastian; Brillert, Dieter; Benra, Friedrich-Karl
    Condensation in Radial Turbines : Part I: Mathematical Modeling
    In: Journal of Turbomachinery Jg. 140 (2018) Nr. 10, S. 101001
  • Schuster, Sebastian; Brillert, Dieter; Benra, Friedrich-Karl
    Condensation in radial turbines : Part II: Application of the mathematical model to a radial turbine series
    In: Journal of Turbomachinery Jg. 140 (2018) Nr. 10, S. 101002
  • Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Hu, Bo
    Investigation on Thrust and Moment Coefficients of a Centrifugal Turbomachine
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 3 (2018) Nr. 2, S. 9
  • Hacks, Alexander; Schuster, Sebastian; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Turbomachine Design for Supercritical Carbon Dioxide Within the sCO2-HeRo.eu Project
    In: Journal of Engineering for Gas Turbines and Power Jg. 140 (2018) Nr. 12, 121017
  • Domnick, Clemens; Brillert, Dieter; Musch, Christian; Benra, Friedrich-Karl
    Clarifying the Physics of Flow Separations in Steam Turbine Inlet Valves at Part Load Operation and Improved Design Considerations
    In: Journal of Fluids Engineering / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 139 (2017) Nr. 8, S. 081105
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Droplet deposition in radial turbines
    In: European Journal of Mechanics / B: Fluids Jg. 61 (2017) S. 289 - 296
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian
    Investigation on flow-induced vibrations of a steam turbine inlet valve considering fluid-structure interaction effects
    In: Journal of Engineering for Gas Turbines and Power Jg. 139 (2017) Nr. 2, 022507
  • Hu, Bo; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Investigation on the flow in a rotor-stator cavity with centripetal through-flow
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 2 (2017) Nr. 4, 18
  • Domnick, Clemens; Bera, Friedrich-Karl; Brillert, Dieter; Musch, Christian
    Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methods
    In: Periodica Polytechnica / Mechanical Engineering / Budapest University of Technology and Economics (Hrsg.) Jg. 60 (2016) Nr. 3, S. 185 - 192
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian
    Numerical Investigation on the Time-Variant Flow Field and Dynamic Forces Acting in Steam Turbine Inlet Valves
    In: Journal of Engineering for Gas Turbines and Power Jg. 137 (2015) Nr. 8, 081601
  • Aufsätze

  • Starflinger, Jörg; Straetz, Marcel Ralf; Hacks, Alexander; Brillert, Dieter; Vojacek, Ales; Hájek, Petr;
    The Supercritical CO2 Heat Removal System - Status and Outlook
    12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) Qingdao, China, October 14-18, 2018,
    Duisburg, Essen (2019)
  • Vorworte / Nachworte

  • Pecnik, Rene; Brillert, Dieter; Christodoulides, Paul; Kalogirou, Soteris
    Selected papers from the 5th European conference on supercritical CO₂ for energy systems
    In: Energy: The international journal Jg. 304 (2024) 132062
  • Bianchi, Giuseppe; Brillert, Dieter; Christodoulides, Paul; Pecnik, Rene; Kalogirou, Soteris
    Selected papers from the 4th European Conference on Supercritical CO₂ for Energy Systems
    In: Energy: The international journal Jg. 263 (2023) Nr. Part B, 125780
  • Beiträge in Sammelwerken und Tagungsbänden

  • Linnemann, Nick; Dolle, Bastian; Brillert, Dieter
    Centrifugal Compressor Instrumentation for Developing an Anomaly Detection Method Using Vibration- and Acoustic Measurement Data
    In: ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition: Volume 12C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions / ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, June 24–28, 2024 London, United Kingdom / American Society of Mechanical Engineers (Hrsg.) 2024 V12CT33A007
  • Tegethoff, Katharina; de Almeida, Carolina Borges; Schuster, Sebastian; Brillert, Dieter; Borges de Almeida, Carolina
    Numerical Method for Investigating Non-Ideal Flow Demonstrated on a Centrifugal Compressor Operating Near the Critical Point of CO2
    In: ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition: Volume 11: Supercritical CO2 2024 V011T28A012
  • Folkers, Steffen; Schuster, Sebastian; Brillert, Dieter
    Transfer Functions for the Inverse Design of Turbomachinery for Thermal Power Storage
    In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition ; (GT2024) ; Volume 6 / 69th ASME Turbo Expo ; June 24-28, 2024, London, UK / American Society of Mechanical Engineers (Hrsg.) 2024 GT2024-123272
  • Unglaube, Tina; Brillert, Dieter
    Acoustoelastic Modes in a Rotor-Cavity System With Superposed Through Flow
    In: Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition (GT 2023): Volume 11A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition "Power for Land, Sea, ans Air", 26-30 June 2023, Boston / American Society of Mechanical Engineers (Hrsg.) 2023 V11AT21A007
  • Martens, Oliver; Schuster, Sebastian; Brillert, Dieter
    An Euler-Based Throughflow Approach for Axial Compressors
    In: Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023) / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Boston, USA; 26 - 30 June 2023 Jg. 13C 2023 v13ct32a013
  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Further development of a through-flow program by considering real gas equation of state
    In: Conference Proceedings of the 5th European sCO2 Conference 2023 / Brillert, Dieter; 5th European sCO2 Conference for Energy Systems : March 14-16, 2023, Prague, Czech Republic / sCO2-Flex Project (Hrsg.) 2023, S. 58 - 65
  • Tegethoff, Katharina; Musch, Christian; Glos, Stefan; Schuster, Sebastian; Brillert, Dieter
    Investigation of the Applicability of Methods Approved for Steam to the Design of Labyrinth Seals in Turbines Operated With CO2 in Supercritical State
    In: Proceedings of ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Volume 12: Supercritical CO2 / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition June 26–30, 2023 Boston, Massachusetts 2023 v012t28a011
  • Abd-El-Hussein, I.; Mäki-Iso, M.; Tiainen, J.; Turunen-Saaresti, T.; Schuster, Sebastian; Brillert, Dieter
    Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen Applications
    In: 15th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics ; ETC15 ; 24 - 28 April 2023, Budapest, Hungary / European Turbomachinery Society (Hrsg.) 2023 ETC2023-109
  • Jenzen, Rebecca; Woiczinski, Christian; Schuster, Sebastian; Brillert, Dieter
    An Euler-Based Throughflow Approach for Centrifugal Compressors : Part A: Extension and Modifications of Models
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V007T19A007
  • Doerr, Tobias; Yildiz, Atilla; Dolle, Bastian; Brillert, Dieter; Yildiz, Attilla
    An Euler-Based Throughflow Approach for Centrifugal Compressors : Part B: Experimental Investigations and Validation
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands; International Gas Turbine Institute 2022 V007T19A006
  • Tiainen, Jonna; Turunen-Saaresti, Teemu; Mäki-Iso, Mikko; Schuster, Sebastian; Brillert, Dieter
    Hydrogen Compression : Towards a New Strategy for the Design of Hydrogen Compressors
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10B: Turbomachinery — Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics / SME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), June 13-17, 2022, Rotterdam, The Netherlands 2022 V10BT35A001
  • Doerr, Tobias; Schuster, Sebastian; Brillert, Dieter
    PDA Laser Measurements of Droplet-Laden Flows in a Four Stage Axial Compressor
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V10AT29A007
  • Wallat, Stefan; Musch, Christian; Brillert, Dieter
    Vortex-Generators Reduce the Dynamic Axial Forces in the Model of a Steam Turbine Control Valve
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 2: Coal, Biomass, Hydrogen, and Alternative Fuels; Controls, Diagnostics, and Instrumentation; Steam Turbine / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V002T20A007
  • Wallat, Stefan; Preibisch, Stefan; Strauch, Matthias; Brillert, Dieter
    A novel test rig using air for investigation of vibration and interaction of two steam turbine control valves
    In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 8: Oil and Gas Applications; Steam Turbine / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V008T22A004
  • Föllner, Sebastian; Brillert, Dieter; Benra, Friedrich-Karl
    An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic Flow Regimes
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-661
  • Abd El Hussein, Ihab; Schuster, Sebastian; Brillert, Dieter
    An attempt for establishing pressure ratio performance maps for supercritical carbon dioxide compressors in power applications
    In: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 124 - 130
  • Dörr, Tobias; Schuster, Sebastian; Brillert, Dieter
    Evaluation of performance gain by interstage injection in a four-stage axial compressor
    In: ASME Turbo Expo 2021: Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy Jg. 7 2021 V007T16A002
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Experimental Investigation of Centrifugal Flow in Rotor-Stator Cavities at High Reynolds Numbers > 10⁸
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-651
  • Barabas, Botond; Benra, Friedrich-Karl; Petry, Nico; Brillert, Dieter
    Experimental damping behavior of strongly coupled structure and acoustic modes of a rotating disk with side cavities
    In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Design and Engineering / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09AT23A004
  • Luo, Jingjing; Brillert, Dieter
    Experimental studies on dry gas seals with time-resolved film thickness measurements
    In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Design and Engineering / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09AT24A003
  • Lapp, Florian Felix; Schuster, Sebastian; Hecker, Simon; Brillert, Dieter
    Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirements
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-562
  • Ren, Haikun; Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Mean-line analysis for supercritical CO₂ centrifugal compressors by using enthalpy loss coefficients
    In: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 68 - 77
  • Hofer, Markus; Ren, Haikun; Hecker, Frieder; Buck, Michael; Brillert, Dieter; Starflinger, Jörg
    Simulation and analysis of a self-propelling heat removal system using supercritical CO₂ at different ambient temperatures
    In: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 14 - 27
  • Heinrich, Christoph Rocky; Unglaube, Tina; Beirow, Bernd; Brillert, Dieter; Steff, Klaus; Petry, Nico
    Surrogate models for the prediction of damping ratios in coupled acoustoelastic rotor-cavity systems
    In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9B: Structures and Dynamics - Fatigue, Fracture, and Life Prediction; Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09BT29A009
  • Abd El Hussein, Ihab; Schuster, Sebastian; Brillert, Dieter
    The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-667
  • Abd El Hussein, Ihab; Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    A design tool for supercritical CO2 radial compressors based on the two-zone model
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 11: Structures and Dynamics: Structural Mechanics, Vibration, and Damping; Supercritical CO2 / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V011T31A012
  • Schuster, Sebastian; Dohmen, Hans-Josef; Brillert, Dieter
    Challenges of compressing hydrogen for pipeline transportation with centrifugal-compressors
    In: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020 GPPS-CH-2020-0045
  • Dolle, Bastian; Hermes, Viktor; Brillert, Dieter
    Deficits in Rans Modelling in the U-Turn of a Multistage Centrifugal Compressor
    In: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020 GPPS-CH-2020-4
  • Luo, Jingjing; Brillert, Dieter
    Experimental investigations on the pressure fluctuations in the sealing gap of dry gas seals with embedded pressure sensors
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 10A: Structures and Dynamics / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V10AT25A012
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cycles
    In: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020
  • Follner, Sebastian; Amedick, Volker; Bonhoff, Bernhard; Brillert, Dieter; Benra, Friedrich-Karl
    Model validation of an euler-based 2D-throughflow approach for multistage axial turbine analysis
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: 2C: Turbomachinery / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V02CT35A055
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Prediction in rotor–stator cavities at high reynolds numbers up to Re ≈ 2 ∙ 10⁸: Towards a new parametric model
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 2E: Turbomachinery / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V02ET39A001
  • Dörr, Tobias; Braun, Stefan; Schuster, Sebastian; Brillert, Dieter
    Proof of concept for a novel interstage injection design in axial compressors
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition / GT 2020; Virtual, Online; 21 - 25 September 2020 Jg. 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines 2020, S. V008T17A005
  • Lapp, Florian Felix; Hecker, Simon; Schuster, Sebastian; Brillert, Dieter
    The multi-phase flow test facility ⇜emma⇝ to investigate local heat transfer coefficients and liquid water films at wet steam conditions
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 9: Oil and Gas Applications; Organic Rankine Cycle Power Systems; Steam Turbine / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V009T23A028
  • von Deschwanden, Inez; Braun, Stefan; Brillert, Dieter
    Effect of Interstage Injection on Compressor Flow Characteristic
    In: Fluids Engineering Division Summer Meeting: Vol.5: Multiphase Flow / ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019 San Francisco, California, USA 2019, S. V005T05A040
  • Dolle, Bastian; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Experimental and numerical investigation on the flow in a return channel of multistage centrifugal compressors
    In: Proceedings of the ASME Turbo Expo: Volume 2B: Turbomachinery / ASME Turbo Expo 2019: Turbomachinery Technical Conference and Expositio; 17–21, 2019; Phoenix, USA 2019, S. GT2019 - 90455
  • Schröder, Tilman Raphael; Dohmen, Hans-Josef; Brillert, Dieter; Benra, Friedrich-Karl
    Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential reynolds number range
    In: Proceedings of the 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC 2019) / ETC 2019; Lausanne, Switzerland; 8 - 12 April 2019 / European Turbomachinery Society (Hrsg.) 2019
  • Dolle, Bastian; Hermes, Viktor; Petry, Nico; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Investigation of aerodynamic effects in stator components of multistage centrifugal compressors
    In: Proceedings of the 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC 2019) / ETC 2019; Lausanne, Switzerland; 8 - 12 April 2019 / European Turbomachinery Society (Hrsg.) 2019 ETC2019-431
  • Schuster, Sebastian; Brillert, Dieter; Martens, Uwe; Hermes, Viktor; Benra, Friedrich-Karl
    Investigation of the evaporation process of liquefied hydrocarbons in front of a compressor
    In: ISROMAC 2017 / 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, 16.-21.12.2017, Maui, Hawaii, USA 2019
  • Hacks, Alexander Johannes; Freutel, Thomas; Strätz, Marcel; Vojacek, Ales; Hecker, Frieder; Starflinger, Jörg; Brillert, Dieter
    Operational experiences and design of the sCO2-HeRo loop
    In: Conference Proceedings of the 3rd European supercritical CO2 Conference 2019 / 3rd European supercritical CO2 Conference, September 19-20, 2019, Paris, France
    Duisburg, Essen 2019, S. 125 - 137
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Stabilizing Effects of Supercritical CO2 Fluid Properties on Compressor Operation
    In: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics / ETC 2019; Lausanne, Switzerland; 8 - 12 April 2019 2019, S. 121
  • Barabas, Botond; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    The behavior of the modal properties of weak and strong coupled acoustic modes at different pressure levels in a rotor-stator test rig
    In: Open Archives of the 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, 16.-21.12.2017, Maui, Hawaii, USA 2019
  • Wallat, Stefan; Domnick, Clemens; Musch, Christian; Brillert, Dieter
    A test rig concept to study fluid structure interactions in a steam turbine valve
    In: Proceedings of the ASME Turbo Expo: Vol. 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines 2018
  • Barabas, Botond; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Damping Behavior of Acoustic Dominant Modes in an Aeroacoustic Test Rig Representing a Simplified Geometry of a High Pressure Radial Compressor
    In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition: Volume 7C: Structures and Dynamics / ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018, Oslo; Norway, 11 - 15 June 2018 2018, S. V07CT36A018
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Droplet deposition in radial turbines
    In: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States 2018
  • von Deschwanden, Inez; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef
    Droplet evaporation in the context of interstage injection
    In: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena andDynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States 2018
  • Hacks, Alexander; Vojacek, Ales; Dohmen, Hans-Josef; Brillert, Dieter
    Experimental investigation of the sCO2-HeRo compressor
    In: Conference Proceedings of the 2nd European sCO2 Conference 2018 / 2nd European sCO2 Conference 2018, 30-31 August 2018, Essen, Germany 2018, S. 50 - 59
  • Hacks, Alexander; Brillert, Dieter
    Scaling considerations for the application of the sCO2-HeRo system in nuclear power plants
    In: Conference Proceedings of the 2nd European sCO2 Conference 2018 / 2nd European sCO2 Conference 2018, 30-31 August 2018, Essen, Germany 2018, S. 60 - 68
  • Schuster, Sebastian; Brillert, Dieter; Hermes, Viktor; Yildiz, Attilla; Benra, Friedrich-Karl
    Thermodynamic modelling aspects of wet compression in radial compressors
    In: Proceedings of the ASME Turbo Expo: Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy / ASME Turbo Expo 2018, Oslo, Norway, June 11–15, 2018 2018, S. V009T27A024
  • Hacks, Alexander; Schuster, Sebastian; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Turbomachine design for supercritical carbon dioxide within the SCO₂-hero.EU project
    In: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition / GT 2018; Oslo; Norway; 11 - 15 June 2018 Jg. 9 2018
  • Strätz, Marcel; Seewald, Michael; Starflinger, Jörg; Schuster, Sebastian; Mertz, Rainer; Brillert, Dieter
    Cycle calculations of a small-scale heat removal system with supercritical CO2 as working fluid
    In: Proceedings of the 25th International Conference on Nuclear Engineering - 2017: Vol. 3: Nuclear fuel and material, reactor physics and transport theory; innovative nuclear power plant design and new technology application / 25th International Conference on Nuclear Engineering, Shanghai, China, July 2–6, 2017 2017, S. V003T13A001
  • Barabas, Botond; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Identification of coupled natural frequencies in a rotor-stator test-rig for different gas properties
    In: 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT12, April 3-7, 2017, Stockholm, Sweden / European Turbomachinery Society (Hrsg.) 2017 ETC2017-057
  • Schuster, Sebastian; Kreischer, Christian; Brillert, Dieter
    Introduction of an integrated turbo-electrical machine
    In: Proceedings of the ASME Turbo Expo: Vol. 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017 2017, S. V008T26A008
  • Hu, Bo; Brillert, Dieter; Benra, Friedrich-Karl; Dohmen, Hans-Josef
    Investigation on the Influence of Surface Roughness on the Moment Coefficient in a Rotor-Stator Cavity With Centripetal Through-Flow
    In: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2017: Volume 1A, Symposia / ASME Fluids Engineering Division Summer Meeting, July 30-August 3, 2017, Waikoloa, Hawaii, USA 2017, S. V01AT03A001
  • Hu, Bo; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Investigation on the flow in a rotor-stator cavity with centripetal through-flow
    In: 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT12, April 3-7, 2017, Stockholm, Sweden / European Turbomachinery Society (Hrsg.) 2017 ETC2017-097
  • Hu, Bo; Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl
    Investigation on thrust and moment coefficients of a centrifugal turbomachine
    In: Open Archives of the 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / ISROMAC 2017; Maui; United States; 16 - 21 December 2017 2017
  • von Deschwanden, Inez; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Brillert, Dieter
    PDA measurements in spray generated by twin-jet-nozzles
    In: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2017: Volume 1B, Symposia / ASME Fluids Engineering Division Summer Meeting, Waikoloa, Hawaii, USA, July 30–August 3, 2017 2017, S. V01BT06A001
  • Starflinger, J.; Brillert, Dieter; Frybort, P.; Hajek, P.; Hennink, A.; Freutel, T.
    Raising Nuclear Reactor Safety to a Higher Level : The Supercritical CO2 Heat Removal System - "sCO2-HeRo"
    In: NENE 2017: Conference Proceedings / 26th International Conference Nuclear Energy for New Europe (NENE), September 11-14, 2017, Bled, Slovenia / Cizelj, Leon; Holler, Tadej (Hrsg.) 2017, S. 405.1 - 405.8
  • Benra, Friedrich-Karl; Brillert, Dieter; Frybort, P.; Hajek, P.; Rohde, M.; Schuster, Sebastian; Seewald, M.; Starfinger, J.
    A supercritical CO2 low temperature Brayton-cycle for residual heat removal
    In: 5th International sCO2 Power Cycles Symposium: Proceedings / The 5th International Symposium - Supercritical CO2 Power Cycles, 28-31 März 2016, San Antonio, Texas 2016
  • Dolle, Bastian; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef
    An educational laboratory with a remote controlled centrifugal pump test rig
    In: Proceedings of the ASME Fluids Engineering Division summer meeting: Volume 2, Fora: Advances in Fluids Engineering Education; Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation / Proceedings of the ASME Fluids Engineering Division summer meeting; FEDSM2016; July 10-14,21016, Washington, DC, USA 2016, S. V002T01A002
  • Kefalas, Alexander; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef
    Comparison of different numerical approaches for determination of compressible fluid flow in narrow gaps
    In: Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2016: Volume 2C: Turbomachinery / ASME Turbo Expo; June 13-17, 2016; Seoul, South Korea 2016 GT2016-57898
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Musch, Christian; Dohmen, Hans-Josef
    Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects
    In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2016, 13.-17. Juni 2016, Seoul, South Korea 2016 GT2016-56314
  • Kefalas, Alexander; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef
    Parametric study of a novel groove design for dry gas seals
    In: Proceedings of the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics / HEFAT 2016; 11 to 13 July 2016; Malaga, Spain 2016, S. 108 - 114
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter;
    Reliability of condensation models for droplet deposition calculation in radial turbines
    Wet Steam Conference, 2016,
    In: Wet Steam Conference Prague: Proceedings / Wet Steam Conference Prague : 12-14 September 2016 / Kolovratník, Michal (Hrsg.) 2016
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Reliability of condensation models for droplet deposition calculations in radial turbines
    In: Wet Stream Conference: 12-14 September 2016 : proceedings / Wet Steam Conference Prague, 12-14 September 2016, Prague, Czech Republic / Kolovratník, Michal; Ondřej, Bartoš (Hrsg.) 2016, S. 78 - 89
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Small scale sCO2 compressor impeller design considering real fluid conditions
    In: The 5th International Symposium - Supercritical CO2 Power Cycles / The 5th International Symposium - Supercritical CO2 Power Cycles, March 28- 31, 2016, San Antonio, Texas 2016
  • Barabas, Botond; Clauss, Stefan; Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Brillert, Dieter
    Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds Numbers
    In: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.) 2015 ETC2015-097
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian
    Improving the Design of Steam Turbine Inlet Valves by Numerical Methods for Enhanced Part Load Operation
    In: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.) 2015 ETC2015-107
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian
    Numerical Investigation on the Vibration of Steam Turbine Inlet Valves and the Feedback to the Dynamic Flow Field
    In: Proceedings of the ASME Turbo Expo 2015: Power for Land, Sea, and Air: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo: Turbine Technical Conference and Exposition ; Montreal, Quebec; 2015.06.15-19 2015 GT2015-42182
  • Weltersbach, D.; Brillert, Dieter; Cichon, C.
    Investigations of a Pre-Swirl Cooling Air Flow System with Data Acquisition in the Absolute and Relative Frame of Reference
    In: Proceedings of the WSEAS international conferences: 5th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HTE '07), 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '07) / IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment ; 5 (Vouliagmeni, Athens) : 2007.08.25-27 2007
  • Benim, A. C.; Cagan, M.; Bonhoff, B.; Bricaud, C.; Brillert, Dieter
    Computational Analysis of Flow and Heat Transfer in a Direct-Transfer Pre-swirl System
    In: 6th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics: Conference Proceedings / European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, 7-11 March 2005, Lille, France 2005
  • Benim, A. C.; Cagan, M.; Bonhoff, B.; Brillert, Dieter
    Simulation of Flow in Gas Turbine Pre-swirl Systems with Emphasis on Rotor-Stator Interface Treatment
    In: Proceedings of the 3rd WSEAS/IASME International Conferences / 3rd WSEAS/IASME, Heat transfer, thermal engineering & environment, fluid mechanics and aerodynamics, 20-22 August 2005, Corfu Island, Greece; Hassan, Ibrahim; Krope, Jurij 2005, S. 206 - 111
  • Benim, A. C.; Cagan, M.; Bonhoff, B.; Brillert, Dieter
    Simulation of Flow in Pre-Swirl Systems with Emphasis on Rotor Stator Treatment
    In: Computational fluid and solid mechanics 2005: proceedings Third MIT Conference on Computational Fluid and Solid Mechanics June 14 - 17, 2005 / 3rd M.I.T Conference on Computational Fluid and Solid Mechanics, June 14-17, 2005, Massachusetts Institute of Technology, Boston, USA 2005
  • Schneider, Oliver; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Analysis of Dust Separation Inside a Pre-Swirl Cooling Air System
    In: ISROMAC 10 : 2004 March 7 - 11, Honolulu, Oahu, Hawaii, USA: International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (10 : 2004 : Honolulu, Hawaii) / Bohn, Dieter (Hrsg.) 2004
  • Schneider, Oliver; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Dust Separation in a Gas Turbine Pre-Swirl Cooling Air System : A Parameter Variation
    In: Proceedings of the ASME Turbo Expo 2004: Vol. 4 / ASME Turbo Expo 2004, June 14 - 17, 2004, Vienna, Austria 2004, S. 231 - 240
  • Benim, A. C.; Brillert, Dieter; Cagan, M.
    Investigation Into the Computational Analysis of Direct-Transfer Pre-Swirl Systems for Gas Turbine Cooling
    In: Proceedings of the ASME Turbo Expo 2004: presented at the 2004 ASME Turbo Expo, June 14 - 17, 2004, Vienna, Austria / ASME Turbo Expo 2004; 2004; Vienna 2004 Paper No. GT2004-54151, pp. 453-460
  • Brillert, Dieter; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Schneider, Oliver; Mirzamoghadam, A. V.
    Application of Conjugate CFD to the Internal Cooling Air Flow System of Gas Turbines
    In: Proceedings of the ASME Turbo Expo 2003: Volume 5: Turbo Expo 2003, Parts A and B / ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, June 16–19, 2003 2003, S. 1051 - 1060
  • Schneider, Oliver; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Experimental and Numerical Analysis of the Flow Structure and Dust Separation Inside a Pre-Swirl Cooling Air System
    In: Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Vol. 2: Symposia, Parts A, B, and C / ASME/JSME Joint Fluids Engineering Conference, July 6 - 10, 2003, Honolulu, Hawaii 2003, S. 577 - 582
  • Brillert, Dieter; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Schneider, Oliver
    Investigation of Internal Cooling Air Flow of Gas Turbines with Attention to Heat Transfer
    In: Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Vol. 2: Symposia, Parts A, B, and C / ASME/JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6–10, 2003 2003, S. 627 - 632
  • Schneider, Oliver; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Investigations of Dust Separation in the Internal Cooling Air System of Gas Turbines
    In: Proceedings of the ASME Turbo Expo 2003: Volume 5: Turbo Expo 2003, Parts A and B / ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, June 16–19, 2003 2003, S. 985 - 992
  • Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Schneider, Oliver
    Grundlagenuntersuchungen an rotierenden Ringräumen zur Optimierung des Sekundärluftsystems moderner Gasturbinen
    In: Gasturbinen in Praxis und Entwicklung: Fortschritte und Betriebserfahrungen ; Tagung Leverkusen, 12. und 13. November 2002 / Tagung "Gasturbinen in Praxis und Entwicklung", 12. und 13. November 2002, Leverkusen 2002, S. 85 - 94
  • Brillert, Dieter; Reichert, A. W.; Simon, Heribert
    The Flow Structure in Rotating Hollow Shafts with Radial Inflow and Axial Throughflow
    In: ASME Turbo Expo 2001: Power for Land, Sea, and Air June 4–7, 2001 New Orleans, Louisiana, USA / ASME Turbo Expo 2001: Power for Land, Sea, and Air, June 4–7, 2001, New Orleans Jg. 3: Heat Transfer; Electric Power; Industrial and Cogeneration 2001 V003T01A077
  • Brillert, Dieter; Reichert, A. W.; Simon, Heribert
    Flow Losses in Rotating Passages in Secondary Air Systems of Gas Turbines
    In: Proceedings of the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8) / 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: ISROMAC-8, 26-30 March 2000, Honolulu / Han, Je-Chin (Hrsg.) 2000
  • Brillert, Dieter; Lieser, D.; Reichert, A. W.; Simon, Heribert
    Total Pressure Losses in Rotor Systems with Radial Inflow
    In: Proceedings of the ASME Turbo Expo 2020 / ASME Turbo Expo 2000: Power for Land, Sea, and Air, May 8–11, 2000, München Jg. 3: Heat Transfer, Electric Power, Industrial and Cogeneration 2000 V003T01A087
  • Brillert, Dieter; Reichert, A. W.; Simon, Heribert
    Calculation of Flow Losses in Rotating Passages of Gas Turbine Cooling Systems
    In: ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration Indianapolis, Indiana, USA, June 7–10, 1999 / ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition ; Indianapolis, Indiana, USA, June 7–10, 1999 1999 V003T01A069; 11 pages
  • Brillert, Dieter; Reichert, A. W.; Simon, Heribert
    Cooling Air Flow in a Multi Disc Industrial Gas Turbine Rotor
    In: ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration ; Stockholm, Sweden, June 2–5, 1998 / ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition ; Stockholm, Sweden, June 2–5, 1998 1998, S. V004T09A027
  • Reichert, Arnd Wolfram; Brillert, Dieter; Simon, Heribert
    Loss Prediction for Rotating Passages in Secondary Air Systems
    In: ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration / ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition; Orlando, Florida, USA, June 2–5, 1997 1997 Paper No. 97-GT-215, pp. V003T09A041
  • Bücher/Sammelwerke/Tagungsbände

  • Brillert, Dieter; (Hrsg.)
    Conference Proceedings of the 4th European sCO₂ Conference 2021
    4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference,
    Duisburg, Essen (2021) 93 Seiten
  • Dissertation

  • Brillert, Dieter
    Strömungsberechnung im Kühl- und Sperrluftsystem von Gasturbinen zur Optimierung des Sekundärluftsystems
    In: Berichte aus der Strömungstechnik Aachen (2001) VI, 119 S. : Ill., graph. Darst.
  • Vorträge

  • Schifflechner, Christopher; de Reus, Jasper; Spliethoff, Hartmut; Saar, Martin O.; Schuster, Sebastian; Brillert, Dieter;
    The potential of CO2-Plume Geothermal (CPG) Systems for CO2 component manufacturers : Opportunities and development needs
    7th International Seminar on ORC Power Systems: 4 - 6 September 2023; Seville, Spain,
    Seville, Spain (2023)
  • Schuster, Sebastian; Hacks, Alexander; Brillert, Dieter;
    Lessons from testing the sCO2-HeRo turbo-compressor-system
    7th International Supercritical CO2Power Cycles Symposium: March 31 – April 2, 2020, San Antonio, USA,
    San Antonio, USA (2020)
  • Schütz, J.; Dohmen, Hans-Josef; Brillert, Dieter;
    Numerical investigation of Droplet dispersion in resting environment, cross flow and parallel flow
    17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, December 16-21, 2017, Maui, Hawaii, USA,
    Maui, Hawaii, USA (2017)
  • von Deschwanden, Inez; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Brillert, Dieter;
    Zweistrahldüsen – Genauigkeit der Bestimmung von Tropfendurchmessern mit Phasen-Doppler Anemometrie
    1st Symposium on Turbomachinery Test Facilities, TTF 2017, 11. - 12.05.2017, Bochum, Deutschland,
    Bochum (2017)
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian;
    Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects
    16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, 10. bis 15. April 2016, Honolulu, Hawaii, USA,
    (2016)
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter;
    Small scale sCO2 compressor impeller design considering real gas conditions
    5th International sCO2 Power Cycles Symposium, San Antonio, Texas, USA, March 29–31, 2016,
    San Antonio, Texas (2016)
  • von Deschwanden, Inez; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef;
    The potential of interstage injection for axial compressors
    16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, 10 -15 April 2016,
    Honolulu, Hawaii (2016)
  • Benra, Friedrich-Karl; Brillert, Dieter; Frybort, O.; Hajek, P.; Rohde, M.; Schuster, Sebastian; Seewald, M.; Starflinger, J.;
    The supercritical CO2 heat removal system - sCO2-HeRo
    1st European Seminar on Supercritical CO2 (sCO2) Power Systems 29.-30. September 2016 - Vienna - Austria,
    (2016)
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian;
    Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methods
    16th International Conference on Fluid Flow Technologies, entitled “Conference on Modelling Fluid Flow” (CMFF’15), 1. - 4. September 2015, Budapest, Hungary,
    Budapest (2015)
  • Domnick, Clemens; Benra, Friedrich-Karl; Brillert, Dieter; Dohmen, Hans-Josef; Musch, Christian;
    Numerical Investigation of the Fluid and Structure Dynamics of a Steam Turbine Inlet Valve at Different Operation Conditions
    Workshop on Safety and Control Valves; APRIL 8-9, 2015 - Brussels, Belgium,
    Brüssel (2015)
  • Brillert, Dieter; Lingner, U.; Maghon, H.;
    Ten Years of Operating Experience with SGT5-4000F : Market-Driven Evolution of Gas Turbines and Plants
    POWER-GEN Asia 2007 ; Bangkok - Thailand - from 4. - 6. 9. 2007,
    (2007)
  • Forschungsdaten

  • Hacks, Alexander; Abd El Hussein, Ihab; Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Experimental Data of Supercritical Carbon Dioxide (sCO2) Compressor at Various Fluid States - Supplementary Data
    (2021) 7.49 MB