Sarah Brinkhues

Dr.-Ing. Sarah Brinkhues

Research » Teaching » Career » Publications

Research

Simulation of deformations in arteries with atherosclerotic lesions
Consideration of the presence of residual stresses in arterial walls
Modeling of anisotropic damage with remanent strains
Parameter adjustment based on a sequential quadratic programming method

Teaching

Technische Mechanik 3 (Dynamik)

Bauinformatik

Finite Element Method: Foundations

Continuum Mechanics

Career

2002	High-school diploma (Abitur), Gymnasium Mariengarden, Burlo
2002-2007	Engineering studies (civil engineering), University of Duisburg-Essen, majoring in higher mechanics and structural engineering
Sept. 2007	Engineering degree (Diploma), Institute of Mechanics, Faculty of Engineering, Department Civil Engineering, University of Duisburg-Essen, Title of diploma thesis: "Anisotropic Damage Modeling of Biological Soft Tissues"
since 11/2007	Research assistant at Institute of Mechanics, University Duisburg-Essen
10/2012	Doctoral degree (Dr.-Ing.), Institute of Mechanics, Department Civil Engineering, Faculty of Engineering, University of Duisburg-Essen, Title: "Modeling and simulation of arterial walls with focus on damage and residual stresses", Reviewers: J. Schröder, A. Klawonn
11/2012-2/2013	Visiting research associate at the California Institute of Technology (Caltech), Division of Engineering and Applied Science, Space Structures Laboratory, Pasadena (USA)

Publications

JabRef References output

Brinkhues, S. (2012), "Modeling and simulation of arterial walls with focus on damage and residual stresses", PhD-Thesis, Institute of Mechanics, University of Duisburg-Essen , Report No. 11.

[BibTeX]

BibTeX:

@PHDTHESIS{Bri:2012:mas,
  author = {Brinkhues, S.},
  title = {Modeling and simulation of arterial walls with focus on damage and residual stresses},
  school = {University of Duisburg-Essen},
  year = {2012},
  type = {PhD-Thesis},
  address = {Institute of Mechanics , University of Duisburg-Essen, Report No. 11},
}

Brinkhues, S., Klawonn, A., Rheinbach, O. & Schröder, J. (2012), "Augmented Lagrange Methods for Quasi-Incompressible Materials - Applications to Soft Biological Tissue", International Journal for Numerical Methods in Biomedical Engineering. Vol. 29, pp. 332-150.

[BibTeX]

BibTeX:

@ARTICLE{BriKlaRheSch:2012:alm,
  author = {Brinkhues, S. and Klawonn, A. and Rheinbach, O. and Schröder, J.},
  title = {Augmented Lagrange Methods for Quasi-Incompressible Materials -- {A}pplications to Soft Biological Tissue},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  publisher = {John Wiley & Sons, Ltd},
  year = {2012},
  volume = {29},
  pages = {332--350},
  number = {3}
}

Balzani, D., Brinkhues, S. & Holzapfel, G.A. (2012), "Constitutive Framework for the Modeling of Damage in Collagenous Soft Tissues with Application to Arterial Walls", Computer Methods in Applied Mechanics and Engineering. Vol. 213-216, pp. 139-151.

[BibTeX]

BibTeX:

@article{BalBriHol:2011:cff,
  author = {Balzani, D. and Brinkhues, S. and Holzapfel, G.A.},
  title = {Constitutive Framework for the Modeling of Damage in Collagenous Soft Tissues with Application to Arterial Walls},
  journal = {Computer Methods in Applied Mechanics and Engineering},
  year = {2012},
  volume = {213--216},
  pages = {139--151}
}

Brinkhues, S. & Schröder, J. (2011), "On the Incorporation of Residual Stresses in Arterial Walls", Proceedings of Applied Mathematics and Mechanics. Vol. 11, pp. 83-84.

[BibTeX]

BibTeX:

  @article {BriSch:2011:oti,
  author = {Brinkhues, S. and Schröder, J.},
  title = {On the Incorporation of Residual Stresses in Arterial Walls},
  journal = {Proceedings of Applied Mathematics and Mechanics},
  volume = {11},
  number = {1},
  pages = {83--84},
  year = {2011},
}

Böse, D., Brinkhues, S., Erbel, R., Klawonn, A., Rheinbach, O. & Schröder, J. (2011), "A Simultaneous Augmented Lagrange Approach for the Simulation of Soft Biological Tissue", Revised version accepted for publication in Proceedings of the 20th International Conference on Domain Decomposition Methods in Science and Engineering, February 2011, San Diego, USA, Lecture Notes in Computational Science and Engineering, Springer-Verlag.

[BibTeX]

BibTeX:

@article{BoeBriErbKlaRheSch:2011:asa,
  author = {Böse, D. and Brinkhues, S. and Erbel, R. and Klawonn, A. and Rheinbach, O. and Schröder, J.},
  title = {A Simultaneous Augmented Lagrange Approach for the Simulation of Soft Biological Tissue},
  journal = {Proceedings of the 20th International Conference on Domain Decomposition Methods in Science and Engineering, February 2011, San Diego, USA, Lecture Notes in Computational Science and Engineering, Springer-Verlag.},
  year = {2011},
  note = {Revised version accepted for publication}
}

Balzani, D., Holzapfel, G.A. & Brinkhues, S. (2011), "Modeling of damage in soft biological tissues and application to arterial walls", In XI International Conference on Computational Plasticity. Fundamentals and Applications.

[BibTeX]

BibTeX:

@inproceedings{BalHolBri:2011:mod,
  author = {Balzani, D. and Holzapfel, G.A. and Brinkhues, S.},
  title = {Modeling of damage in soft biological tissues and application to arterial walls},
  booktitle = {XI International Conference on Computational Plasticity. Fundamentals and Applications},
  year = {2011}
}

Brinkhues, S., Tielke, A.-K. & Schröder, J. (2010), "Sensitivity Analysis of Plaque Components within Arterial Wall Simulations", Proceedings of Applied Mathematics and Mechanics. Vol. 10, pp. 73-74.

[BibTeX]

BibTeX:

@article {BriTieSch:2010:sao,
  author = {Brinkhues, S. and Tielke, A.-K. and Schröder, J.},
  title = {Sensitivity Analysis of Plaque Components within Arterial Wall Simulations},
  journal = {Proceedings of Applied Mathematics and Mechanics},
  volume = {10},
  number = {1},
  pages = {73--74},
  year = {2010},
}

Balzani, D., Brinkhues, S. & Holzapfel, G.A. (2009), "Comparative Study of Polyconvex Strain-Energy Functions used for the Modeling of Damage Hysteresis in Overstretched Arterial Walls", In Proceedings of the 7th EUROMECH Solid Mechanics Conference.

[BibTeX]

BibTeX:

@inproceedings{BalBriHol:2009:cso,
  author = {Balzani, D. and Brinkhues, S. and Holzapfel, G.A.},
  title = {Comparative Study of Polyconvex Strain-Energy Functions used for the Modeling of Damage Hysteresis in Overstretched Arterial Walls},
  booktitle = {Proceedings of the 7th EUROMECH Solid Mechanics Conference},
  year = {2009}
}

Brinkhues, S., Balzani, D. & Holzapfel, G.A. (2009), "Simulation of Damage Hysteresis in Biological Soft Tissues", Proceedings of Applied Mathematics and Mechanics. Vol. 9, pp. 155-156.

[BibTeX]

BibTeX:

@article{BriBalHol:2009:sod,
  author = {Brinkhues, S. and Balzani, D. and Holzapfel, G.A.},
  title = {Simulation of Damage Hysteresis in Biological Soft Tissues},
  journal = {Proceedings of Applied Mathematics and Mechanics},
  year = {2009},
  volume = {9},
  pages = {155-156}
}

Brinkhues, S. (2007), "Anisotropic Damage Modeling of Biological Soft Tissues", Diplomarbeit, Institut für Mechanik, Fakultät für Ingenieurwissenschaften, Abteilung Bauwissenschaften, Universität Duisburg-Essen

[BibTeX]

BibTeX:

@techreport{Bri:2007:adm,
  author = {S. Brinkhues},
  title = {Anisotropic Damage Modeling of Biological Soft Tissues},
  year = {2007}
}

Stand: 28.02.2012

Sarah Brinkhues

Dr.-Ing. Sarah Brinkhues

Research

Teaching

Career

Publications

Dr.-Ing.Sarah Brinkhues

Contact

Dr.-Ing.
Sarah Brinkhues